Oneplus One Diztronic Stickerboy Mod

condor97

Super Moderator
Staff member
Premium Member
Joined
Aug 26, 2014
Messages
286
Reaction score
349
A while back I bought a Diztronic case from OneStepAhead at XDA. This case quickly became my favorite case. The case can be found here:

Diztronic TPU Case- Notification List

The look and fit is perfect, and it provides some of the best protection that can be found right now. The only thing that I was missing was the textured sandstone back that I love so much on the Oneplus. I wanted this texture not only for the look and feel but for the grip. The case tends to slide out of my hands easily. I also own the Pelosi sandstone case, but I feel the Diztronic provides better coverage. While browsing the forums, I found the Stickerboy thread here:

Sticker Boy Skin Review

I decided to try to apply a stickerboy skin to the back of my Diztronic found here:
https://tpu-cases.com/index.php?main_page=product_info&cPath=104_105&products_id=396

I bought the matte black found here:
http://www.stickerboy.net/collectio...s/black-matte-antibacterial-oneplus-one-skins

*Note: I bought the Type 2 back panel only.

Other skin sources:
http://www.cruzerlite.com/skins/oneplus-one
https://dbrand.com/shop/oneplus-one

Here are the results:

Pros:
- Fit is almost perfect. The rear camera/mic/headphone jack cutouts are just slightly off. Edit: Fixed with hairdryer
- Definitely improves grip. Edit: After using it for a day, I feel that I need something "grippier"
- Adheres well.
- Looks great, I love having the 1+ on the back.
- Feels like a little added protection.

Cons:
- There is a slight ridge around the edge of the sticker that you can feel with your fingers.
- The rear camera, mic port, and the headphone jack all have slight overlaps where the small portions of the back part of the sticker are exposed.(See pics). Edit: fixed with hairdryer.
- I get a bit of lint on the edge of the skin. Wipes off easily.
- Texture is not sandstone grit like the back of the OPO. It feels more like a textured vinyl.
- Need more grip.

Tip:
-Use a hair dryer to form the skin around the camera/mic openings. Credits rodger-sp at XDA
rodger-sp;55039298 said:
After I installed the Skin I used a hair dryer to heat the skin so I could bend it around the camera opening.
For the mic. opining after heating the skin I used a very small pair of tweezers with a sharp point to increase the mic. opining. I inserted the tweezers slowly wile twisting them.
Summary:
The jury is still out on how well this will work and stand up to every day use. I just applied the skin yesterday so we shall see. Overall I am very happy with how the project turned out. I am going to use a red paint pen to accent the 1+ logo on the back. In retrospect I would have considered a different colored skin to accomplish that. I may purchase another Diztronic/Stickerboy combo to get a little variety.:)


..

..

..

..

..

Note: Camera/Mic cutouts.

..



Note: Headphone Jack cutout.

..





..
Finished product! A fine tipped Sharpee paint pen was used to highlight the 1+ logo.


..
 
Last edited:
D

Divergent

Guest
A while back I bought a Diztronic case from OneStepAhead on XDA. This case quickly became my favorite case.

The look and fit is perfect, and it provides some of the best protection that can be found right now. The only thing that I was missing was the textured sandstone back that I love so much on the Oneplus. I wanted this texture not only for the look and feel but for the grip. The case tends to slide out of my hands easily. I also own the Pelosi sandstone case, but I feel the Diztronic provides better coverage.


I decided to try to apply a stickerboy skin to the back of my Diztronic found here:
https://tpu-cases.com/index.php?main_page=product_info&cPath=104_105&products_id=396

I bought the matte black found here:
http://www.stickerboy.net/collectio...s/black-matte-antibacterial-oneplus-one-skins

*Note: I bought the Type 2 back panel only.

Other skin sources:
http://www.cruzerlite.com/skins/oneplus-one
https://dbrand.com/shop/oneplus-one

Here are the results:

Pros:
- Fit is almost perfect. The rear camera/mic/headphone jack cutouts are just slightly off. Edit: Fixed with hairdryer
- Definitely improves grip. Edit: After using it for a day, I feel that I need something "grippier"
- Adheres well.
- Looks great, I love having the 1+ on the back.
- Feels like a little added protection.

Cons:
- There is a slight ridge around the edge of the sticker that you can feel with your fingers.
- The rear camera, mic port, and the headphone jack all have slight overlaps where the small portions of the back part of the sticker are exposed.(See pics). Edit: fixed with hairdryer.
- I get a bit of lint on the edge of the skin. Wipes off easily.
- Texture is not sandstone grit like the back of the OPO. It feels more like a textured vinyl.
- Need more grip.

Tip:
-Use a hair dryer to form the skin around the camera/mic openings. Credits rodger-sp at XDA.
Summary:
The jury is still out on how well this will work and stand up to every day use. I just applied the skin yesterday so we shall see. Overall I am very happy with how the project turned out. I am going to use a red paint pen to accent the 1+ logo on the back. In retrospect I would have considered a different colored skin to accomplish that. I may purchase another Diztronic/Stickerboy combo to get a little variety.:)


..

..

..

..

..

Note: Camera/Mic cutouts.

..



Note: Headphone Jack cutout.

..


Finished Product:

..
Just private messaged you ( check it out )

Sent through my N7000 using AOSP keyboard
 
OP
condor97

condor97

Super Moderator
Staff member
Premium Member
Joined
Aug 26, 2014
Messages
286
Reaction score
349
Finished product! A fine tipped Sharpee paint pen was used to highlight the 1+ logo.


..

..
 
Last edited:
Top