Can't factory reset. Ph98img.zip Update fails...Please help.

TommyJames

New Member
Joined
Dec 29, 2012
Messages
5
Reaction score
0
Have PH98IMG.zip on sd card. Gets this far...

*** LOCKED *** VIGOR PVT SHIP S-ON RL HBOOT-2.11.0000 eMMC-boot

HBOOOT
Parsing...[SD ZIP]

[1]...
...[18] ...
start update? <VOL UP>

Next to "[1] BOOTLOADER" "- Fail-PU" And below [18]..., "Partition update fail!" "Update Fail!" "Press <POWER> to reboot."

It's an HTC Rezound I'm trying to get back to stock, Verizon.

Any ideas?
 

Bpowder33

Member
Joined
Jul 26, 2011
Messages
310
Reaction score
8
Couple questions... Were you unlocked before? Which RUU are you trying to flash?
 
OP
T

TommyJames

New Member
Joined
Dec 29, 2012
Messages
5
Reaction score
0
Couple questions... Were you unlocked before? Which RUU are you trying to flash?

oem verizon...
RUU_VIGOR_ICS_35_S_VERIZON_WWE_3.14.605.12_Radio_RS_1.22.10.0424r_3622A_MR3_9K_release_270509_signed.exe

When trying to reset from rom, final window says,"ERROR[170];USB CONNECTION ERROR", Check usb cable, etc...
What to try next?
Please advise.
Thank you!
 
OP
T

TommyJames

New Member
Joined
Dec 29, 2012
Messages
5
Reaction score
0
screenshots

ruuexperienced.JPGruuuuuu.JPG
 
OP
T

TommyJames

New Member
Joined
Dec 29, 2012
Messages
5
Reaction score
0
unlocked?

Not sure...when I knew to look at s-' & 'locked status, it's been this way... thus I can skip PH98IMG.zip update & restore from rom via usb?
 

acejavelin

Member
Joined
May 26, 2012
Messages
790
Reaction score
10
Location
North Dakota, USA
I have seen other people have issues with the full RUU installer, at least on earlier ROM versions, I didn't know there was a EXE installer for the 3.14.605.12 version.

I would suggest doing it manually via the RUU ZIP file Bpowder33 referenced above, it is very simple and just about idiot proof.
 
OP
T

TommyJames

New Member
Joined
Dec 29, 2012
Messages
5
Reaction score
0
same thing happens...

Have PH98IMG.zip on sd card.
Gets this far...

*** LOCKED ***
VIGOR PVT SHIP S-ON RL
HBOOT-2.11.0000
eMMC-boot

HBOOT

Parsing...[SD ZIP]
[1]...
...[18]
...start update?
<VOL UP>

Next to "[1] BOOTLOADER" "- Fail-PU"
And below [18]..., "Partition update fail!"
"Update Fail!"
"Press <POWER> to reboot."
 

Bpowder33

Member
Joined
Jul 26, 2011
Messages
310
Reaction score
8
What firmware are you on? Because HBOOT 2.11 was back on ginger bread.
 

acejavelin

Member
Joined
May 26, 2012
Messages
790
Reaction score
10
Location
North Dakota, USA
Mobile Overload has a collection of most of the older RUU's here: [RUU] HTC Rezound RUU RoundUp

Perhaps trying the last GB RUU (2.1.605.11) will help but I really don't like the "Partition Update Fail" message, it kinda makes me wonder if the flash memory bad. :unsure:
 
Top