Kernel Question for CM 5.0.8

bigsal82

Member
Joined
Mar 24, 2010
Messages
130
Reaction score
0
Location
NorthEast Ohio
I didnt see a thread about this. I recently flashed over from Froyo to 5.0.8 and decided to use a bekit 1000mhz 5 slot standard voltage kernel. it worked but was a little hot so i decided to try one of P3droids kernels and it sent me into a boot loop.

So i booted into recovery and installed one of P3droids kernels i had for froyo with the wifi fix that was on my sdcard. I believe its a 1.2ghz kernel. My phone seems to be working great now and running cooler.

So basically my question is, Is it ok to use that kernel even though it was for froyo while its still working really good and got me out of the boot loop. is there anything i should be worried about

Edit: Nevermind it started acting up and im now restoring to my backup. Going back to bekit at least its stable maybe getting rid of some widgets will help
 
Last edited:

pdroid

Silver Member
Joined
Mar 4, 2010
Messages
2,252
Reaction score
7
Location
Philly
Yeah, I wouldn't advise using froyo kernels on eclair builds.

I have read on CM forums that for a few they were seeing higher temps with 5.0.8. Not sure why.
 
OP
B

bigsal82

Member
Joined
Mar 24, 2010
Messages
130
Reaction score
0
Location
NorthEast Ohio
Yea It got me out of the boot loop. Guess I panicked. I ended up restoring and reflashing the kernel and its much better. Thanks
 
Top