[HELP] RAZR brick without BMM

romanrsr

New Member
Joined
Feb 27, 2013
Messages
2
Reaction score
0
About me
- I from Argentina
- I have XT910 GSM
- Sorry for my bad English
- I have backup CID
- I have not installed the BMM

I have a problem, and I think it's pretty big! I have a RAZR Arg LATAM Claro it was working with the official rom 4.0.4, I followed the steps to install the ROM Jellywiz:
-dd if = / dev/block/mmcblk1p18 of = / sdcard / cid.img (I have it to backup)
fastboot flash mbm-allow-mbmloader-flashing-mbm.bin
-reboot-bootloader fastboot
cid-fastboot erase
fastboot flash boot-boot_jb.img
but I made the mistake of not installing the BMM, so now I start the original rom, and I can not carry him another since I have the Custom Recovery hence I can not restore the CID. Someone can give me a hand? Thank you!
Greetings!
 

jpcalhoun

Senior Member
Joined
Dec 14, 2010
Messages
1,567
Reaction score
61
Location
PA
About me
- I from Argentina
- I have XT910 GSM
- Sorry for my bad English
- I have backup CID
- I have not installed the BMM

I have a problem, and I think it's pretty big! I have a RAZR Arg LATAM Claro it was working with the official rom 4.0.4, I followed the steps to install the ROM Jellywiz:
-dd if = / dev/block/mmcblk1p18 of = / sdcard / cid.img (I have it to backup)
fastboot flash mbm-allow-mbmloader-flashing-mbm.bin
-reboot-bootloader fastboot
cid-fastboot erase
fastboot flash boot-boot_jb.img
but I made the mistake of not installing the BMM, so now I start the original rom, and I can not carry him another since I have the Custom Recovery hence I can not restore the CID. Someone can give me a hand? Thank you!
Greetings!
Hello romanrsr...welcome to the forum. Most of the users on this forum have the CDMA (US) XT912 version of the Razr/RazrMaxx. I recommend you go to Droidrzr.com. They have a fairly big XT910 subforum. You may find some help over there.
 
OP
R

romanrsr

New Member
Joined
Feb 27, 2013
Messages
2
Reaction score
0
Hello romanrsr...welcome to the forum. Most of the users on this forum have the CDMA (US) XT912 version of the Razr/RazrMaxx. I recommend you go to Droidrzr.com. They have a fairly big XT910 subforum. You may find some help over there.

I already installed the ROM address Chinese .. Thank you!

Greetings!
 

vnayrp

New Member
Joined
Mar 3, 2013
Messages
1
Reaction score
0
I need the CID.img firl badly

Hi,
can you please mail me the CID.img asap.
I have not backed up the cid.img and now i am in trouble.
my mail id is [email protected]
it is very important for me.
Please help me,
Vinay

About me
- I from Argentina
- I have XT910 GSM
- Sorry for my bad English
- I have backup CID
- I have not installed the BMM

I have a problem, and I think it's pretty big! I have a RAZR Arg LATAM Claro it was working with the official rom 4.0.4, I followed the steps to install the ROM Jellywiz:
-dd if = / dev/block/mmcblk1p18 of = / sdcard / cid.img (I have it to backup)
fastboot flash mbm-allow-mbmloader-flashing-mbm.bin
-reboot-bootloader fastboot
cid-fastboot erase
fastboot flash boot-boot_jb.img
but I made the mistake of not installing the BMM, so now I start the original rom, and I can not carry him another since I have the Custom Recovery hence I can not restore the CID. Someone can give me a hand? Thank you!
Greetings!
 

ivangladesh

New Member
Joined
Apr 4, 2013
Messages
1
Reaction score
0
Dudes I'll really apreaciate if you can send mi the cid.img too... I made the same mistake...
 
Top