What's new
DroidForums.net | Android Forum & News

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

[HELP] RAZR brick without BMM

romanrsr

New Member
About me
- I from Argentina
- I have XT910 GSM
- Sorry for my bad English
- I have backup CID
- I have not installed the BMM

I have a problem, and I think it's pretty big! I have a RAZR Arg LATAM Claro it was working with the official rom 4.0.4, I followed the steps to install the ROM Jellywiz:
-dd if = / dev/block/mmcblk1p18 of = / sdcard / cid.img (I have it to backup)
fastboot flash mbm-allow-mbmloader-flashing-mbm.bin
-reboot-bootloader fastboot
cid-fastboot erase
fastboot flash boot-boot_jb.img
but I made the mistake of not installing the BMM, so now I start the original rom, and I can not carry him another since I have the Custom Recovery hence I can not restore the CID. Someone can give me a hand? Thank you!
Greetings!
 
About me
- I from Argentina
- I have XT910 GSM
- Sorry for my bad English
- I have backup CID
- I have not installed the BMM

I have a problem, and I think it's pretty big! I have a RAZR Arg LATAM Claro it was working with the official rom 4.0.4, I followed the steps to install the ROM Jellywiz:
-dd if = / dev/block/mmcblk1p18 of = / sdcard / cid.img (I have it to backup)
fastboot flash mbm-allow-mbmloader-flashing-mbm.bin
-reboot-bootloader fastboot
cid-fastboot erase
fastboot flash boot-boot_jb.img
but I made the mistake of not installing the BMM, so now I start the original rom, and I can not carry him another since I have the Custom Recovery hence I can not restore the CID. Someone can give me a hand? Thank you!
Greetings!
Hello romanrsr...welcome to the forum. Most of the users on this forum have the CDMA (US) XT912 version of the Razr/RazrMaxx. I recommend you go to Droidrzr.com. They have a fairly big XT910 subforum. You may find some help over there.
 
Hello romanrsr...welcome to the forum. Most of the users on this forum have the CDMA (US) XT912 version of the Razr/RazrMaxx. I recommend you go to Droidrzr.com. They have a fairly big XT910 subforum. You may find some help over there.

I already installed the ROM address Chinese .. Thank you!

Greetings!
 
I need the CID.img firl badly

Hi,
can you please mail me the CID.img asap.
I have not backed up the cid.img and now i am in trouble.
my mail id is [email protected]
it is very important for me.
Please help me,
Vinay

About me
- I from Argentina
- I have XT910 GSM
- Sorry for my bad English
- I have backup CID
- I have not installed the BMM

I have a problem, and I think it's pretty big! I have a RAZR Arg LATAM Claro it was working with the official rom 4.0.4, I followed the steps to install the ROM Jellywiz:
-dd if = / dev/block/mmcblk1p18 of = / sdcard / cid.img (I have it to backup)
fastboot flash mbm-allow-mbmloader-flashing-mbm.bin
-reboot-bootloader fastboot
cid-fastboot erase
fastboot flash boot-boot_jb.img
but I made the mistake of not installing the BMM, so now I start the original rom, and I can not carry him another since I have the Custom Recovery hence I can not restore the CID. Someone can give me a hand? Thank you!
Greetings!
 
Back
Top