i am trying to sbf i have all the files and when i load into bootloader and connect the usb cable it switches to data transfer and will not flash please help me
Try powering on your phone normally and connect it to your pc via usb. Once its connected change the connection type to "PC mode". Open up rsdlite, make sure you phone shows up on line 1, press the ... button to load the sbf file, then hit start. Your phone should automatically switch over to the bootloader and begin flashing.
Ok, when you power into the bootloader and connect your phone does it show up in line 1 of rsdlite? If so hit ... to load the sbf file then, when the sbf file shows up in the top left window your good to hit start. It will sit on the bootloader screen for a few while it creates the image files.
IMEI/ESN/MEID: N / A Technology: N / A Software Version: N / A Flex Version: N / A Bootloader Version: v0x003004 DRM Version: N / A AP Die ID: 24100207ffa45d010000f8ff0100 BP Die ID: 0000000000000000b55432890485 AP Public ID: 2ebefc01feec367bc2ab35151cb9473495bfee10 BP Public ID: 040000000500000002000000ffff00002d003289
and line one shows this model:s flash omap3630 mi
port 1
port type usb
imei/esn/meid n/a
status connected
when i load the sbf is shoews on the right wondow
and when i hit start is says
failed flashong process failed flashing process (0x7100); phone connected
the sbf i have is VZR_MB810_2.3.31_1FF_01.sbf i got it from here it is the full stock ota .340 if you have another one you think i should try please send me the link