What's new
DroidForums.net | Android Forum & News

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

ICS Leak Freeze on Boot

rjd

New Member
Update: Spoke to soon. Now stuck on "Starting Applications Screen"Problem Solved:Here are what I belive are the incorrect steps I was taking:FXZ to 902Take OTA to 905Reboot to recoveryWide Data/Factory ResetWipe CacheApply updateWhat WorkedFXZ to 902Take OTA to 905Reboot to recoveryApply updateYeah, DO NOT wipe from recovery before installing the leak. That seams to have been my problem.Thanks everyone for all your responses.Original Post:I installed the leak(2233) and it just freezes on the droid boot animation.I flashed back to 902Took the 905 otaPut ics on the sdFlashed in stock recoveryI tried 3 times. Cant find anyone having this problem so i must be doing something wrong.
 
Sounds like you have a corrupt 2233 file. Give me a few and I will provide you a link to my Google Drive for a working file.
 
The ICS update should clear your cache; but to be on the safe side you should clear / wipe the cache before rebooting. Also because this update is substantial the boot up will take a little longer than normal.
 
I'm having a similar issue. My phone hangs at the starting applications screen. I've been pulling my hair since Sunday trying to get this to take.

0626120050-L.webp

I've tried 6 or 7 2233 and 2231 leak files. and 2 or 3 different FXZ 902 files.
I get no error codes when flashing.
I've tried wiping cache and factory reseting in between every flash and every combination from no wiping to only wiping cache etc..
I've tried going all the way back to 893 and OTA to 902 then OTA to 905 then flash 2233.
I've reformatted my internal memory from 905 before flashing.
I've reformatted a different SD card both from PC and from phone and the only file is the ics leak.
I've also tried moto-fastboot flashing both cdt.bin and mbm
When in that screen I can press the home button and get a tactile feedback vibration, but no other button does.
It will charge the phone while in that screen, and I've let it sit on that screen overnight with no results.
The only way out is a battery pull, after a pull it hangs on the Droid screen when trying to reboot.
After flashing the leak either 2231 or 2233 when going into stock recovery it shows the android icon for ics. The one with the panel open rather than the triangle with the droid inside.
I've tried flashing all the way up to the leak with no sd card inserted.
I've also tried flashing all the way from 902 to 2233 with no sim card inserted.
Reflashing 2233 a 2nd time takes me to a fastboot loop.
Previous to this I was running safestrap with the AKOP nightlies over 905 with no problems except for the normal ics over the gb kernel/radio issues.
The phone works well in 902 and 905 with no issues.
I have not tried to install a ics rom over 905 again since trying the leak.
I can root 905 with no problems using motofail after the 902 FXZ to 905 OTA flash.
I've flashed the leak with root and no root.
The only thing I set up before flashing the root is wifi after FXZing 902 to get the 905 OTA.
I've tried rooting then saving the 905OTA file and flashing that from recovery on a freshly formatted SD card as well.
I've tried flashing the leak from stock recovery right after flashing 905 from recovery without rebooting first into 905.
I've let it run for awhile in 905 as long as overnight before flashing the leak.

There's more I've probably tried but forget. I think I've flashed over 30 times the past week trying to get this to work. Any help would be appreciated.
 
CBMGGM said:
Sounds like you have a corrupt 2233 file. Give me a few and I will provide you a link to my Google Drive for a working file.

Can you link the 902 fxz you used please
 
Back
Top