[EB01 WALKTHROUGHS] Rooting, Clockwork, Voodoo, Stock and Custom ROM, Battery, etc

[TAPOUT27]

All credit goes to lowkee over at XDA for the write-up......

Orig link: [EB01 WALKTHROUGHS] Rooting, Clockwork, Voodoo, Stock and Custom ROM, Battery, etc - xda-developers

[EB01 WALKTHROUGHS] Rooting, Clockwork, Voodoo, Stock and Custom ROM, Battery, etc
Here is a concise set of walkthroughs for multiple phone customizations.

Even a beginner should be able to follow these walkthroughs.

All walkthroughs are based on the EB01 Froyo (Android 2.2) ROM Series. If this is not your ROM series, please replace the EB01 zip files with the zip files for your applicable ROM series.

If something sounds vague or unclear, let me know and I'll make sure i clear it up in the associated walkthrough. Thanks go to anyone who wrote these mods, wrote portions of these instructions and hosts these files. We would be in the stone age if it weren't for you guys!

These walkthroughs are made as a general guide only.
AS ALWAYS, BACKUP BEFORE YOU FLASH ANYTHING.

Post 1: Must do steps for everything listed below
Post 2: Rooting
Post 3: Installing ClockWork Mod (for new CWM users)
Post 4: Updating ClockWork Mod (for existing CWM users)
Post 5: Upgrade to a Froyo ROM (from any other ROM)
Post 6: Upgrade to a VooDoo kernel
Post 7: Add the AOSP and puzzle lock screen, power options and accurate battery
Post 8: Remove the time from the top bar

MUST DO STEPS FOR ALL FASCINATE CUSTOMIZING:


1. Download and Install Samsung Drivers
64bit:
http://www.wikifilez.com/root%20file...alaxyS_x64.zip
or
32bit:
http://www.wikifilez.com/root%20file...Phones_x86.exe

2. Go to Settings > Applications > Development > Enable Debugging then plug in your phone

 

[TAPOUT27]

Rooting

Prerequisites:
Post 1

Directions:

1. Extract downloaded FascinateRoot_v02.zip

2. Open the folder where you extracted the FascinateRoot_v02 files

3. Execute START_ROOT

4. Command window will appear
- Carefully read all directions
- Press any key when you are ready to continue

5. When the process is done it will say Complete.
- At this point, hit CTRL+C, unplug and restart your phone.
- Download titanium backup (optional) -- If it asks you for Superuser permission you have successfully rooted

Done!

--------------------------------------------------------------------------
Trouble Shooting

Most Common Solutions to errors:
1. Make sure you completed Post 1
2. Make sure your phone is connected using the original cable that came with the phone (e.g.: blackberry cables don't normally work)
3. Verify that debugging is enabled.
4. Try to run it again

adb push: Permission Denied
Your SD card is mounted to your PC.
- Use the drop down notification bar to turn off usb storage.
- Close out and start again


Prompt tells you that you do not have permissions
The process failed to grant you temporary root access.
- Close out and begin again.

After continuing from reboot the process freezes for a long time
This is normal. This process take a good 5 minutes, and it will appear frozen throughout this time. Don't freak out. Be patient.

Error Device not found
If this happens after continuing after first reboot, this means that the phone was not properly connected before continuing. After reboot unplug the phone, plug it back in, then continue.


Portions of this method credit DroidXCon @ Android Forums


Download: xda-developers

 

[TAPOUT27]

Installing ClockWork Mod (for new CWM users)

Prerequisites:
Post 1

1: Enter manual download mode by..
- Powering off your phone
- Holding the vol down button while..
- Holding the power button until the Samsung logo appears
- Release both buttons
- You should see a yellow triangle. If you don't, power off and try again.

2: Plug in the USB cable from your PC to your phone

3: Download Odin 1.3
- Unzip it

4: Download ClockWork Mod (non-voodoo)
- Unzip it

5: Execute Odin.exe

6: Press the "PDA" button
- IMPORTANT!! Do not press the "Phone" button!
- Select the cwm_froyo.tar file from the CWM zip file
- Press "Start"
- Wait for your phone to reboot
- Close Odin

7: When your phone boots..
- Enable USB file copying from the drop-down menu
- Copy the update.zip file from the CWM zip to the root of your SD card (the shared drive of your phone)

8: Install "ROM Manager" (optional)
- Get ROM Manager from Market
- Open ROM Manager
- Press "Backup Current"
- Press "OK"
- The phone should reboot into Clockwork Mod and perform your first full ROM (aka 'Nandroid') backup.

Done!
or

Updating Clockwork Mod via .zip file (for existing CWM users)

Prerequisites:
Post 1
Post 2
Post 3

1: Download ClockWork Mod (non-voodoo)
- Do not unzip it

2: Plug in the USB cable from your PC to your phone

3: With your phone booted..
- Enable USB file copying from the drop-down menu
- Copy the update.zip file from the CWM zip to the root of your SD card (the shared drive of your phone)

4: Flash the new Clockwork Mod by.. (two methods)
Method A:
- Powering off your phone
- Holding the vol down and vol up buttons simultaneously while..
- Holding the power button until the Samsung logo appears
- Release all buttons
- You should see Samsung recovery mode
- Use the vol button to highlight "sdcard/update.zip"
- Press the home softkey
- Clockwork Mod should load. If it doesn't, power off and try again.
- Diagnosis: If Samsung recovery does not find the update.zip file, you do not have CWM recovery installed and must refer to Post 2 to install it.
- Use the vol button to highlight "Install zip from SD card"
- Press the power button
- Use the vol button to highlight "Choose zip from SD card"
- Press the power button
- Use the vol button to highlight the cwm_froyo.zip file you copied to your SD card earlier
- Press the power button
- Use the vol button to highlight the confirmation text
- Press the power button


Method B:
- Get ROM Manager from Market
- Open ROM Manager
- Press "Install ROM from SD Card"
- Select the cwm_froyo.zip you copied to your SD card
- Press "OK"
- The phone should reboot into Clockwork Mod and flash the new CWM recovery file as well as copy the updated update.zip file.
- Your phone should reboot as normal

Done!

 

[TAPOUT27]

Upgrade to the EB01 Froyo ROM (from any other ROM)

CAUTION: Following this post will wipe all of your data! Be sure to backup your apps and data prior to following these steps.

Prerequisites:
Prerequisites:
Post 1
Post 2
Post 3 or 4

1: Enter manual download mode by..
- Powering off your phone
- Holding the vol down button while..
- Holding the power button until the Samsung logo appears
- Release both buttons
- You should see a yellow triangle. If you don't, power off and try again.

2: Plug in the USB cable from your PC to your phone

3: Download Odin 1.3
- Do not unzip it
4: Download the EB01 Froyo modem
- Do not unzip it
5: Execute Odin.exe

6: Press the "PDA" button
- IMPORTANT!! Do not press the "Phone" button!
- Select the eb01modem.tar file from the modem zip file
- Press "Start"
- Wait for your phone to reboot
- Close Odin

7: Download the EB01 Froyo ROM of your choice
- Example ROMS (choose one only):
a: Stock ROM (thread)
b: SuperClean 2.0 (thread)
- Do not unzip it
8: With your phone booted..
- Enable USB file copying from the drop-down menu
- Copy the Froyo ROM zip file to your SD card (the shared drive of your phone)

9: Flash the new Froyo ROM by.. (two methods)
Method A: (manual method)
- Power off your phone
- Holding the vol down and vol up buttons simultaneously while..
- Holding the power button until the Samsung logo appears
- Release all buttons
- You should see Samsung recovery mode
- Use the vol button to highlight "sdcard/update.zip"
- Press the home softkey
- Clockwork Mod should load. If it doesn't, power off and try again.
- Diagnosis: If Samsung recovery does not find the update.zip file, you do not have CWM recovery installed and must refer to Post 2 to install it.
- Use the vol button to highlight "Install zip from SD card"
- Press the power button
- Use the vol button to highlight "Choose zip from SD card"
- Press the power button
- Use the vol button to highlight the Froyo ROM you copied to your SD card earlier
- Press the power button
- Use the vol button to highlight the confirmation text
- Press the power button
- Your phone should reboot to your new Froyo ROM
- Note: The first boot will take up to 5 minutes. Be patient!

Method B: (automated method)
- Get ROM Manager from Market
- Open ROM Manager
- Press "Install ROM from SD Card"
- Select the Froyo ROM you copied to your SD card
- Check the "Clear data/cache box"
- Optional, but recommended: Select the "backup current" check box
- Press "OK"
- The phone should reboot into Clockwork Mod and flash the new Froyo ROM as well as clear the data and cache.
- Your phone should reboot to your new Froyo ROM
- Note: The first boot will take up to 5 minutes. Be patient!

Done!

 

[TAPOUT27]

Upgrade to the EB01 VooDoo Kernel (using any EB01 Froyo ROM)

CAUTION: Following this post is dangerous and may result in complete data loss. Proceed with these steps carefully.

Important note: VooDoo is not required to run Froyo, so please skip this post if you are new to phone flashing and, at worst, phone de-bricking.

Prerequisites:
Post 1
Post 2
Post 3 or 4
Post 5

1: Download the EB01 Voodoo kernel (*link removed until further testing has been finalized*)

2: Plug in the USB cable from your PC to your phone

3: With your phone booted..
- Enable USB file copying from the drop-down menu
- Copy the Froyo ROM zip file to your SD card (the shared drive of your phone)

4: Flash the new VooDoo Kernel by.. (two methods)
Method A: (manual method)
- Power off your phone
- Holding the vol down and vol up buttons simultaneously while..
- Holding the power button until the Samsung logo appears
- Release all buttons
- You should see Samsung recovery mode
- Use the vol button to highlight "sdcard/update.zip"
- Press the home softkey
- Clockwork Mod should load. If it doesn't, power off and try again.
- Diagnosis: If Samsung recovery does not find the update.zip file, you do not have CWM recovery installed and must refer to Post 2 to install it.
- Use the vol button to highlight "Install zip from SD card"
- Press the power button
- Use the vol button to highlight "Choose zip from SD card"
- Press the power button
- Use the vol button to highlight the Voodoo kernel you copied to your SD card earlier
- Press the power button
- Use the vol button to highlight the confirmation text
- Press the power button
- CWM recovery should now flash and enable the Voodoo kernel and copy a new update.zip to the root of your SD card
- Your phone should reboot using your new Voodoo kernel
- Note: The first boot will take up to 10 minutes. Be patient!

Method B: (automated method, recommended)
- Get ROM Manager from Market
- Open ROM Manager
- Press "Install ROM from SD Card"
- Select the Voodoo kernel you copied to your SD card
- Optional, but recommended: Select the "backup current" check box
- Press "OK"
- The phone should reboot into Clockwork Mod, flash and enable the Voodoo kernel and copy a new update.zip to the root of your SD card
- Your phone should reboot using your new Voodoo kernel
- Note: The first boot will take up to 10 minutes. Be patient!

Done!

 

[TAPOUT27]

Add the AOSP and puzzle lock screen, power options and accurate battery mod (using any EB01 Froyo ROM)

Important note: This post is not required to run Froyo.

Prerequisites:
Post 1
Post 2
Post 3 or 4
Post 5

1: Download either..
a: Puzzle Lock, Power and Battery mod
b: AOSP Lock, Power and Battery mod

2: Plug in the USB cable from your PC to your phone

3: With your phone booted..
- Enable USB file copying from the drop-down menu
- Copy the Puzzle Lock mod zip file to your SD card (the shared drive of your phone)

4: Flash the new Lock, Power and Battery mod by.. (two methods)
Method A: (manual method)
- Power off your phone
- Holding the vol down and vol up buttons simultaneously while..
- Holding the power button until the Samsung logo appears
- Release all buttons
- You should see Samsung recovery mode
- Use the vol button to highlight "sdcard/update.zip"
- Press the home softkey
- Clockwork Mod should load. If it doesn't, power off and try again.
- Diagnosis: If Samsung recovery does not find the update.zip file, you do not have CWM recovery installed and must refer to Post 2 to install it.
- Use the vol button to highlight "Install zip from SD card"
- Press the power button
- Use the vol button to highlight "Choose zip from SD card"
- Press the power button
- Use the vol button to highlight the Lock, Power and Battery mod you copied to your SD card earlier
- Press the power button
- Use the vol button to highlight the confirmation text
- Press the power button
- CWM recovery should now flash the Lock, Power and Battery mod
- Your phone should reboot as normal
- Note: The first boot will take up to 3 minutes. Be patient!

Method B: (automated method, recommended)
- Get ROM Manager from Market
- Open ROM Manager
- Press "Install ROM from SD Card"
- Select the Lock, Power and Battery mod you copied to your SD card
- Optional, but recommended: Select the "backup current" check box
- Press "OK"
- The phone should reboot into Clockwork Mod and flash the Lock, Power and Battery mod
- Your phone should reboot as normal
- Note: The first boot will take up to 3 minutes. Be patient!

Done!

 

[TAPOUT27]

Add the EB01 Clock Removal mod (using any EB01 Froyo ROM)

This mod removes the time from the top title bar.

Important note: Clock Removal is not required to run Froyo.

Prerequisites:
Post 1
Post 2
Post 3 or 4
Post 5

1: Download the Clock Removal mod

2: Plug in the USB cable from your PC to your phone

3: With your phone booted..
- Enable USB file copying from the drop-down menu
- Copy the Clock Removal mod zip file to your SD card (the shared drive of your phone)

4: Flash the Clock Removal mod by.. (two methods)
Method A: (manual method)
- Power off your phone
- Holding the vol down and vol up buttons simultaneously while..
- Holding the power button until the Samsung logo appears
- Release all buttons
- You should see Samsung recovery mode
- Use the vol button to highlight "sdcard/update.zip"
- Press the home softkey
- Clockwork Mod should load. If it doesn't, power off and try again.
- Diagnosis: If Samsung recovery does not find the update.zip file, you do not have CWM recovery installed and must refer to Post 2 to install it.
- Use the vol button to highlight "Install zip from SD card"
- Press the power button
- Use the vol button to highlight "Choose zip from SD card"
- Press the power button
- Use the vol button to highlight the Clock Removal mod you copied to your SD card earlier
- Press the power button
- Use the vol button to highlight the confirmation text
- Press the power button
- CWM recovery should now flash the Clock Removal mod
- Your phone should reboot as normal
- Note: The first boot will take up to 2 minutes. Be patient!

Method B: (automated method, recommended)
- Get ROM Manager from Market
- Open ROM Manager
- Press "Install ROM from SD Card"
- Select the Clock Removal mod you copied to your SD card
- Optional, but recommended: Select the "backup current" check box
- Press "OK"
- The phone should reboot into Clockwork Mod and flash the Clock Removal mod
- Your phone should reboot as normal
- Note: The first boot will take up to 2 minutes. Be patient!

Done!

 

[TAPOUT27]

Reserved for future walkthrough's

 

[SonRK]

Great Guide,

Got up at 5AM to work on this and I'm running a beautiful bloatless Samsung Fascinate (Just picked this up from Craigslist the day before). The clockwork recovery link has been altered and I had troubles being able to run update.zip to get into Clockwork Recovery. I ended up flashing an older version via Odin and then the rest of the guide worked perfectly fine.

I didn't realize that there is no LED indicator on this phone! This is huge considering I would often just stare at my Droid 1 to see if I had anything important.

 

[Rafael]

Great Guide,

Got up at 5AM to work on this and I'm running a beautiful bloatless Samsung Fascinate (Just picked this up from Craigslist the day before). The clockwork recovery link has been altered and I had troubles being able to run update.zip to get into Clockwork Recovery. I ended up flashing an older version via Odin and then the rest of the guide worked perfectly fine.

I didn't realize that there is no LED indicator on this phone! This is huge considering I would often just stare at my Droid 1 to see if I had anything important.

In that case you should download noled from the market. Thanks for the guide OP.

 

[Jamis0n]

Thank you for putting this up on DF.... will be doing this tonight!!

rockin froyo:
super clean 1.0
dark theme

btw, this was 8pen-ed.

 

[Eclipsehunter2002]

They say Imitation is the highest form of flattery , great job looks good.

 

[TAPOUT27]

They say Imitation is the highest form of flattery , great job looks good.

not really sure what your trying to say here....

 

[ireash]

I need some help please.

i followed the instructions but am having problems. When I go to download the .Zip file it says invalid signature. I am getting into CWM as I downloaded Rommanager from the market. Manual wont let me update either.

the one wierd thing is when I connected to Odin it only got as far as connection and then sat there. Never really completed or rebooted my phone? Could this be the problem?

What should I do?

This is all I get from Odin after starting it:

<ID:0/007> Added!
<ID:0/007> Odin v.3 engine (ID:7)
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..

And it sits there!

 

[TAPOUT27]

I need some help please.

i followed the instructions but am having problems. When I go to download the .Zip file it says invalid signature. I am getting into CWM as I downloaded Rommanager from the market. Manual wont let me update either.

the one wierd thing is when I connected to Odin it only got as far as connection and then sat there. Never really completed or rebooted my phone? Could this be the problem?

What should I do?

This is all I get from Odin after starting it:

<ID:0/007> Added!
<ID:0/007> Odin v.3 engine (ID:7)
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..

And it sits there!

Go here and follow these instructions...prob be easier and faster than what your doing http://www.droidforums.net/forum/sa...roms-w-root-new-clockwork-updated-2-11-a.html