Unable to restore stock rom using Odin

dpedu

New Member
Joined
Jan 23, 2014
Messages
2
Reaction score
0
Hi all!

I've been trying to restore my Version S4 to the stock "ME7" system using Odin. I was running a safestrap based ME7 rom until I decided to restore.

I'm confident I have the correct firmware file, and USB drivers.

When I attempt to flash, the Odin log says:

Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> COMBINATION_I545VRUAME7_I545VZWAME7_690088_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!! 
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003> 
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I researched that error, and it suggested using the pit file, so I tracked down this and put it in the Pit slot:

Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003> 
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

Not really sure what's going wrong. I've also tried firmware files from a few different sources, as well as different USB cables and computers to flash from. Any ideas? Thanks!
 
Last edited:
Top