DroidForums.net | Android Forum & News
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Replaced the Digitizer/screen assy
- Thread starter Thisispol
- Start date
I would check the connection for the board to the battery, and re-seat all pop-off connectors inside. Those tiny connectors have dozens of pins and any one could be slightly loose causing what you are experiencing.
Good luck!
Those and any others you had to disconnect temporarily in order to gain access to the Digitizer.
Tore the unit down to the digitizer and mobo, checked the connections and pins, same issue. Curious, as according to the screen, the battery is charging just fine. Just won't actually turn on.
How much power does the charging system say the battery has?
Sent from my DROID RAZR using Tapatalk with voice to text translation. Please excuse minor spelling/grammar/punctuation errors.
Originally when I first put it back together 50%.
After leaving it plugged in its at 100%.
Then it has to be a hardware problem if it won't power up now.
Sent from my DROID RAZR using Tapatalk with voice to text translation. Please excuse minor spelling/grammar/punctuation errors.
Time for another tear down until I figure out what the deal is then I guess. Appreciate the input.
Did you have any luck finding your problem?
I have 2 parts Razrs I'm going to attempt to merge and was happy to see that the Razr does actually have a sm switch vs the D1 which used a tiny piece of metal that was formed to provide the oil can effect to contact two points.
I assume that you do feel a slight tactile click when pressing the power btn? because it is so tiny and alignment during assembly is very critical. The vol up and down use the same type switch.
Lemme know if you need any pics of the tiny connectors or what have you.
GL
X/BillyD..
I have 2 parts Razrs I'm going to attempt to merge and was happy to see that the Razr does actually have a sm switch vs the D1 which used a tiny piece of metal that was formed to provide the oil can effect to contact two points.
I assume that you do feel a slight tactile click when pressing the power btn? because it is so tiny and alignment during assembly is very critical. The vol up and down use the same type switch.
Lemme know if you need any pics of the tiny connectors or what have you.
GL
X/BillyD..
i replaced my screen last night and it is doing the same thing, the moto logo comes on then the battery meter then it goes off
it is saying it's at 100%
But i did have a little white rubber piece left over that i didn't know where it went so i did not put it back in
any ideas
it is saying it's at 100%
But i did have a little white rubber piece left over that i didn't know where it went so i did not put it back in
any ideas