HELP! Unable to flash using CWRM.

[Timdotthomas]

I have been tinkering with my Fascinate too much. Now I can't get my phone into CWRM. I was trying to flash a new ROM. When I go to Recover, here is what I see:

Android system recovery <2e>

Samsung Recovery Utils
- for BML -

reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition

at the bottom it says:

E:Can't mount /dev/block/st11
(Invalid argument)
E:Can't mount /dev/block/mmcblk0p1
(Invalid argument)
#MANUAL MODE#
E:Can't mount /dev/block/st11
(Invalid argument)
E:Can't mount /dev/block/mmcblk0p1
(Invalid argument)

Can someone help me out please.

Sent from my evil Fascinate 3.4

 

[hecantbreathe]

Hmm...

What CWMR are you using? Seems like 3.x

What ROM are you trying to flash?

What is your current set up?

 

[Timdotthomas]

Hmm...

What CWMR are you using? Seems like 3.x

What ROM are you trying to flash?

What is your current set up?

First i had Superclean 2.9.2 with voodoo, then a few days ago i switched to Evil 3.4. then today tried to flash Evil Fascinate 3.4.1. Normally I just hit the power button and go to recovery that way. Also have tried to use ROM Manager App with no success.

 

[TAPOUT27]

Hmm...

What CWMR are you using? Seems like 3.x

What ROM are you trying to flash?

What is your current set up?

First i had Superclean 2.9.2 with voodoo, then a few days ago i switched to Evil 3.4. then today tried to flash Evil Fascinate 3.4.1. Normally I just hit the power button and go to recovery that way. Also have tried to use ROM Manager App with no success.

ODIN the newest CWMR 3.0+ here in the forums,
when it says reset,
unplug phone, put battery in, immediately boot into new CWMR,
wipe cache and flash your voodoo kernel of choice(try PB&J 4/26/11 voodoo)
then reboot

should be good to go with newest CWMR and newest voodoo kernel on EVIL v3.4

then reboot into CWMR
wipe cache and dalvik
flash EVIL v3.4.1
reboot ENJOY

 

[Timdotthomas]

Ok I will try.
So to disable lagfix all I have to do is put in a folder with that wording? Also how do I verify that it is disabled?
After I odin the cwm how do I reboot so that it goes straight to recovery?
BTW thanks for all your help.

Sent from my rooted samsung fascinate with Evil F

 

[TAPOUT27]

Ok I will try. So to diable lagfix all I have to do is put in a folder with that wording? Also how do I verify that it is disabled?
BTW thanks for all your help.

Sent from my rooted samsung fascinate with Evil F

I edited my above post, forget disabling lagfix....just follow it now k

 

[Timdotthomas]

Cool. How do you restart so that I goes straight to recovery?

Sent from my rooted samsung fascinate with Superclean 2.2

 

[Jschnee]

Had the same issue. U ever flas cwm via rom manager?

Sent from my SCH-I500 using DroidForums

 

[TAPOUT27]

Cool. How do you restart so that I goes straight to recovery?

Sent from my rooted samsung fascinate with Superclean 2.2

hold vol up+vol dwn+pwr but for 12-13 seconds

 

[TAPOUT27]

Had the same issue. U ever flas cwm via rom manager?

Sent from my SCH-I500 using DroidForums

no Rom Manager is useless with our recoveries at the moment

 

[Nas]

Hmm...

What CWMR are you using? Seems like 3.x

What ROM are you trying to flash?

What is your current set up?

First i had Superclean 2.9.2 with voodoo, then a few days ago i switched to Evil 3.4. then today tried to flash Evil Fascinate 3.4.1. Normally I just hit the power button and go to recovery that way. Also have tried to use ROM Manager App with no success.

ODIN the newest CWMR 3.0+ here in the forums,
when it says reset,
unplug phone, put battery in, immediately boot into new CWMR,
wipe cache and flash your voodoo kernel of choice(try PB&J 4/26/11 voodoo)
then reboot

should be good to go with newest CWMR and newest voodoo kernel on EVIL v3.4

then reboot into CWMR
wipe cache and dalvik
flash EVIL v3.4.1
reboot ENJOY

I can't find that pbj kernal. Due share... I looked on the xda. Page not luck, maybe I'm looking in the wrong place...

Sent from my Evil Fascinate, Comavolt oc 1.2 ghz...

 

[TAPOUT27]

First i had Superclean 2.9.2 with voodoo, then a few days ago i switched to Evil 3.4. then today tried to flash Evil Fascinate 3.4.1. Normally I just hit the power button and go to recovery that way. Also have tried to use ROM Manager App with no success.

ODIN the newest CWMR 3.0+ here in the forums,
when it says reset,
unplug phone, put battery in, immediately boot into new CWMR,
wipe cache and flash your voodoo kernel of choice(try PB&J 4/26/11 voodoo)
then reboot

should be good to go with newest CWMR and newest voodoo kernel on EVIL v3.4

then reboot into CWMR
wipe cache and dalvik
flash EVIL v3.4.1
reboot ENJOY

I can't find that pbj kernal. Due share... I looked on the xda. Page not luck, maybe I'm looking in the wrong place...

Sent from my Evil Fascinate, Comavolt oc 1.2 ghz...

this is his newest kernel page...as of 4/26/11 http://goo.gl/RKTbt

also OTB-RELOADED was just updated to v1.2 [KERNEL][TouchWiz][4.27.11] OTB-Reloaded Kernel - xda-developers

 

[Nas]

ODIN the newest CWMR 3.0+ here in the forums,
when it says reset,
unplug phone, put battery in, immediately boot into new CWMR,
wipe cache and flash your voodoo kernel of choice(try PB&J 4/26/11 voodoo)
then reboot

should be good to go with newest CWMR and newest voodoo kernel on EVIL v3.4

then reboot into CWMR
wipe cache and dalvik
flash EVIL v3.4.1
reboot ENJOY

I can't find that pbj kernal. Due share... I looked on the xda. Page not luck, maybe I'm looking in the wrong place...

Sent from my Evil Fascinate, Comavolt oc 1.2 ghz...

this is his newest kernel page...as of 4/26/11 http://goo.gl/RKTbt

also OTB-RELOADED was just updated to v1.2 [KERNEL][TouchWiz][4.27.11] OTB-Reloaded Kernel - xda-developers

Are all those kernals the same? I would assume I would use the 50uv but which one? There are like 8 lol

Sent from my Evil Fascinate, Comavolt oc 1.2 ghz...

 

[TAPOUT27]

I can't find that pbj kernal. Due share... I looked on the xda. Page not luck, maybe I'm looking in the wrong place...

Sent from my Evil Fascinate, Comavolt oc 1.2 ghz...

this is his newest kernel page...as of 4/26/11 http://goo.gl/RKTbt

also OTB-RELOADED was just updated to v1.2 [KERNEL][TouchWiz][4.27.11] OTB-Reloaded Kernel - xda-developers

Are all those kernals the same? I would assume I would use the 50uv but with one? There are like 8 lol

Sent from my Evil Fascinate, Comavolt oc 1.2 ghz...

The descriptions are pretty specific...

theres:

TW voodoo and nonvoodoo <~~~~~you want these(im running the -50uv)
AOSP voodoo and nonvoodoo

 

[Nas]

this is his newest kernel page...as of 4/26/11 http://goo.gl/RKTbt

also OTB-RELOADED was just updated to v1.2 [KERNEL][TouchWiz][4.27.11] OTB-Reloaded Kernel - xda-developers

Are all those kernals the same? I would assume I would use the 50uv but with one? There are like 8 lol

Sent from my Evil Fascinate, Comavolt oc 1.2 ghz...

The descriptions are pretty specific...

theres:

TW voodoo and nonvoodoo <~~~~~you want these(im running the -50uv)
AOSP voodoo and nonvoodoo

OK thanks I'm getting the hang on it. Quick question why don't you go higher than 1ghz? I'm sure you can at least go to 1.2 with a 50uv.



Sent from my Evil Fascinate, Comavolt oc 1.2 ghz...