What's new
DroidForums.net | Android Forum & News

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

AP Fastboot

jzmax22

Member
Hi,

I just recently fxz 'ed my Bionic to have it factory and apparently i had a Flash Failure .It booted up fine all new, thought nothing of it. Now i was out running errands with no charger and my phone died . When i get home and hook it up to the wall charger it goes straight to the AP Fastboot mode s ( Flash Failure) Battery Low Cannot Program .... I cant get to any other mode. hoping i did not Brick it. Any help Would be Awesome!!
 
Here's my instructions for R3L3As3Droot and 43v3R Root V2.1 (but if you've already done an FXZ you probably don't need this): I just thought you could perhaps get this to work as you are able to get into Fastboot Mode -

The following is just an FYI: I had to go back to stock rooted after I had a bad rom install. I used: R3L3As3Droot And 43V3R Root For The Bionic V2.1 - RootzWiki to flash back to stock rooted with Forever Root hack installed. I followed the instructions below (I just typed this from memory so hopefully I didn't leave anything out. If I did I'm sure others will point out any corrections that need to be made):



1. Extract the zip folder on your computer.
2. Navigate to the R3L3As3Droot folder you just created
3. ENTER AP FASTBOOT MODE ON YOUR PHONE [Both Vol Dwn and Up Plus Pwr/Scroll Dwn to AP Fastboot/Press Vol up]
4. Plug phone into computer
5. Double click the file R3L3AS3DRoot.bat for windows, MotoRooter.sh for Linux, or Mac-MotoRooter for Mac OS X in the folder.
6. Just follow the instructions on the screen
7. When your phone boots up and the Green Android is asking you to activate your phone, don’t. Instead do the 4 corners = Bypass Activation.
5. Bypass The Activation Screen: touch the top left corner of the screen, then top right, then bottom right, and then bottom left. This will bypass the Android Activation Screen. Then,
9. Set usb mode to Charge Only and then make sure USB Debugging is checked in Settings>Applications>Development
10. Resume following instructions on the computer screen.

Good luck.
 
thanks for the response, but it seems because my battery is dead it wont let me program. I need a way to charge my battery as my phone wont get out of AP fastboot Flash mode s ( flash Failure)
 
thanks for the response, but it seems because my battery is dead it wont let me program. I need a way to charge my battery as my phone wont get out of AP fastboot Flash mode s ( flash Failure)

yeah, I was afraid it was more complicated than I thought. Sounds like you need the charger that will charge a battery not installed in the phone. I've read of some guys that hacked a charger cord apart and clipped the appropriate leads directly to the battery. Also, some folks manage to borrow a charged battery. Good luck.
 
Back
Top