AP Fastboot Flash Mode (Boot Failure)

[jlocurto]

Okay so i just recently rooted my Razr. Put on Eclipse and everything was working phenomenally. I then downloaded Rom Toolbox, and changed the boot screen- still worked great. I tried to change the boot up image thru Rom Toolbox. Now this is what my phone says
It did not change the boot image, the Motorola Logo still shows up and the next screen is as follows:

AP Fasboot Flash Mode (s) (Boot Failure)
0A.6C
To return to normal mode-first press power key to power down

DEvice is LOCKED. Status Code:0

Battery Low
Cannot Program
Connect USB
Data Cable

Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG:system, status: 0X0056)
Invalid CG OTV (CG:system)

and if i power down it brings me back to the same thing. please help!

 

[Dave12308]

I'm sorry, i'm not too familiar with the RAZR, but if this were a Bionic the answer would be the .902 FXZ file (because the entire thing is signed, it will recovery from basically anything you can currently flash to the Bionic). I'm just not sure if there is one for the RAZR, and if there is, how you would charge the battery to program it in the first place. Not to turn this into a removeable vs. nonremoveable battery debate, but this is one of those times where a removeable battery would be helpful.

I'm sure someone more versed in all things RAZR may be able to figure it out for you. Good luck.