Separate names with a comma.
Discussion in 'Android Support' started by rgn2000, Nov 14, 2009.
Great...now the question is how do you get the update? Or know if you got one?
All the information regarding the update is contained in this thread:
Just did my forced update and now my 2009 CX9 works. I am totally relieved.
After reading this, the first thing I did was dial *228 and hit option 1 for the phone "programming" option. When finished, I tried A2DP audio in my car and it worked. Good news.
I thought that by doing the above I was applying the 2.0.1 firmware update, but phone still says 2.0 in Settings. So not exactly sure what fixed my A2DP, but it's now working.
I've tried just recently on my 2010 VW GTI and all I get is ticking sounds as well. If it works in the 2008 rabbits its because you have an aftermarket pioneer headunit.
I just did this went back to my car to try it now everything works flawlessly thaNks for the help!
Did you get the update? Not the *228 method but the actual software update.
well previously i had the 2.0.1 update. and it didnt work. then i did the *228 and it started working.
Digging out an old thread here, I know, but I have the 2011 cx9 with navigation. It is new as of a week or two, and I had it working fine with bluetooth phone and a2dp audio.
I "installed" the ipod harness and box $230 ripoff combo, which doesn't work for some reason, and after turning things on and reconnecting the battery I lost audio over A2DP. I still have telephone, and it still thinks it is getting audio (the nav screen lets me pause/start/skip in pandora), but no sound comes out!
I am going nuts here. Any suggestions? Radio works for sound.
I would try unpairing your phone and then turn off your phone and pull the battery. Obviously put the battery back in and reboot the phone. Also delete the phone from your mazda interface. Then repair the phone to the car. Hopefully this will work. If not report back. BTW what phone do you have?