I need a 250 to 1000 kernel

[dmacleo]

any recommendations for 250-1000 std volt kernel for sapphire?
I do not like the 125, not gonna get into the reasons.
is there a 125 that also allows 250 as a choice? that would work.

 

[Mayh3m]

p3designs.info/sapphire/

her ya go man here they all are

 

[dmacleo]

all those are 125.

 

[RW-1]

What is the reason?

You should just contact P3, he can direct you to one.

How about just setting setCPU to a low of something higher than 125?

 

[Mayh3m]

if you look more carfully the last two sections (not modules) one is 125 the other is 250.

 

[dmacleo]

if you look more carfully the last two sections (not modules) one is 125 the other is 250.

on P3Droid Kernels I see 3 sections.
first is SV 125's, second is LV 125's, and third is module lists with no figures listed.
the 250's are on normal non-sapphire page but have not heard if they work well or not.

 

[dmacleo]

What is the reason?

You should just contact P3, he can direct you to one.

How about just setting setCPU to a low of something higher than 125?

this is what I have been doing but my phone is one that is not a huge "fan" of the low volt kernels. but the next step from 125 is 400, a 250 would be a bit better.

 

[TRIKOTRET]

What is the reason?

You should just contact P3, he can direct you to one.

How about just setting setCPU to a low of something higher than 125?

this is what I have been doing but my phone is one that is not a huge "fan" of the low volt kernels. but the next step from 125 is 400, a 250 would be a bit better.

Here you go P3Droid Kernels

 

[dmacleo]

tried 3 and all are boot looping on sapphire, first place I tried as on other roms I used these kernels.
just locking all setcpu profiles to 400 min.

 

[TRIKOTRET]

tried 3 and all are boot looping on sapphire, first place I tried as on other roms I used these kernels.
just locking all setcpu profiles to 400 min.

I set the setcpu min 400 and I also got boot loop on sapphire. This are my first loops with this ROm. Maybe we can put the min at 400 :icon_eek:

 

[justinthegeek]

tried 3 and all are boot looping on sapphire, first place I tried as on other roms I used these kernels.
just locking all setcpu profiles to 400 min.

Did you use the kernels made for Sapphire or just the regular ones. I know the regular ones have issues with Sapphire. I just set the min to 400MHz on mine with out issues.

 

[Mayh3m]

I'm running the lv250-1000 kernal....no problems....no loops.... I can set it to 250 and I've been running this kernal since 0.4.1 so I know its stble plus excelent batt life even oced to 1000 all day

 

[dmacleo]

tried 3 and all are boot looping on sapphire, first place I tried as on other roms I used these kernels.
just locking all setcpu profiles to 400 min.

Did you use the kernels made for Sapphire or just the regular ones. I know the regular ones have issues with Sapphire. I just set the min to 400MHz on mine with out issues.

had to try non-sapphire as all sapphire ones are 125 based. I've set to 400 too.

 

[wingdo]

tried 3 and all are boot looping on sapphire, first place I tried as on other roms I used these kernels.
just locking all setcpu profiles to 400 min.

Did you use the kernels made for Sapphire or just the regular ones. I know the regular ones have issues with Sapphire. I just set the min to 400MHz on mine with out issues.

Why do you set the minimum to 400?

 

[Tanknspank]

The bootloops are because other kernels look for firmware that sapphire doesn't have, so he asked p3 to make some for the rom.

Sent from my Droid using Tapatalk