[KERNEL] [GSM/CDMA][IML74K] Apex Kernel V5 (1/1/12) - 3.0.14, UV Controls, 1.35GHz

[Fabolous]

What a gift it is to have the same kernel run on both the GSM and LTE versions of the phone! This kernel will run on all 4.0.3 ROMS on both the GSM and CDMA Galaxy Nexus.

Feedback is definitely appreciated!

Apex Kernel v5 (1/1/12)

• Updated to 3.0.14

• Re-enabled user voltage control

• Considerable undervolt (check table below) - credit to coolbho3k

• GPU overclock to 384MHz - credit to coolbho3k

• Optional 1.35 overclock slots (boots to 1.2GHz by default) - credit to imoseyon

• init.d support

• I/O tweaks -- credit francisofranco

• Charging and powering up the phone works while phone is off now.

Voltages

Source Code

https://bitbucket.or...p-tuna/overview

Download

signed_Apex_Kernel_v5_IML74K.zip

Mirror

signed_Apex_Kernel_v5_IML74K.zip

aa5029ef4a8f056516633b2913333880 signed_Apex_Kernel_v5_IML74K.zip

*wipe dalvik cache

Screenshots

If you enjoy my work, consider buying me a beer

Donations FabDroid

 

[Fabolous]

Reserved

 

[humanputting]

Can I use this with android revolution HD? Will undervolting improve my battery life?

Sent from my Galaxy Nexus using DroidForums

 

[haproot]

I think you need a 4.0.3 ROm for this kernel. Undervolting will improve your battery life.

 

[StingRay]

Found this thread after having the power off/charging freeze on Fab's ROM...just tried flashing the _120.zip kernel file and got stuck on Google boot image...any ideas? Used to do this all the time on my OG Droid, but so far I'm evidently a little rusty because I'm having some problems...

Well I'm 0 for 2 on trying to flash new Apex kernels on Fab's ROM on my GNex...got stuck both times at the Google image and had to boot into recovery and restore a backup. MD5's were correct on both....

 

[StingRay]

Can these kernels be used on Fab's ICL53F ROM? Trying to fix the power off/charging problem...

 

[Fabolous]

What a gift it is to have the same kernel run on both the GSM and LTE versions of the phone! This kernel will run on all 4.0.3 ROMS on both the GSM and CDMA Galaxy Nexus.

Feedback is definitely appreciated!

Apex Kernel v5 (1/1/12)

• Updated to 3.0.14

• Re-enabled user voltage control

• Considerable undervolt (check table below) - credit to coolbho3k

• GPU overclock to 384MHz - credit to coolbho3k

• Optional 1.35 overclock slots (boots to 1.2GHz by default) - credit to imoseyon

• init.d support

• I/O tweaks -- credit francisofranco

• Charging and powering up the phone works while phone is off now.

Voltages

Source Code

https://bitbucket.or...p-tuna/overview

Download

signed_Apex_Kernel_v5_IML74K.zip

Mirror

signed_Apex_Kernel_v5_IML74K.zip

aa5029ef4a8f056516633b2913333880 signed_Apex_Kernel_v5_IML74K.zip

*wipe dalvik cache

Screenshots

If you enjoy my work, consider buying me a beer

Donations FabDroid

 

[Fabolous]

Whoops! I forgot I already had a thread here:

http://www.droidforums.net/forum/fabolous-nexus-kernels/190096-gsm-cdma-iml74k-apex-kernel-v5-1-1-12-3-0-14-uv-controls-1-35ghz.html

Please close this one

 

[Fabolous]

This kernel is for use with 4.0.3 ROMs only. If you're looking for one to flash, I recommend this one ;-)

http://www.droidforums.net/forum/fa...ld-1-apm-fb-sync-trebuchet-more-1-2-12-a.html

 

[Art Vandelay]

Awesome. Really like this kernal with Axiom 2.4. Any chance you add an interactiveX governor though?

Sent from my Galaxy Nexus using DroidForums

 

[JackpotClavin]

This is by far the best kernel I've ever seen regarding battery drain while idle. Very well done

Sent from my Galaxy Nexus using DroidForums

 

[nosman614]

I am getting really bad battery life out of this. I thought maybe I used my phone more, but my phone dropped 20% battery in just an hour with next to no usage. Any thoughts?

I am running aokp M3.