DroidForums.net | Android Forum & News
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Drag racing GTEC App?
- Thread starter Trever1t
- Start date
I have already contacted The creators of Dynolicious asking them if they were going to make an app for the droid and this is their response.
"Thanks for your interest in Dynolicious.
We are considering porting to Android, but don't have a fixed decision or timeline yet.
Best,
Justin Morgenthau
BunsenTech, LLC"
I guess if they get a good number of requests we could make this happen
"Thanks for your interest in Dynolicious.
We are considering porting to Android, but don't have a fixed decision or timeline yet.
Best,
Justin Morgenthau
BunsenTech, LLC"
I guess if they get a good number of requests we could make this happen
I'll send them an email! thanks!
that's exactly what I'm looking for
In the mean time, you might wanna try aDyno or DinoDyno. They're in the Market...and free.
I looked at both of them. In the descriptions it says nothing about 1/4 mile times
aDyno has quarter mile times in the description.
I looked at both of them. In the descriptions it says nothing about 1/4 mile times
Adyno does say 1/4 mile times, thanks, I'll try them also!
i have aDyno and havent had a chance to get into it... the one time i tried it, it said my car had 860 horse when i know i only have about 400 @ the wheels... this weekend ill get more of a chance to play with the dyno plots and 1.4 mile times.
i heard dino dyno locks up on android 2.0 so i havent attempted to install it.
its closer then the dynolicios app that said i had 900 horsepower and 1200 ft/lbs torque.
i have read that these apps dont work correctly with cars that run high boost and im running 24psi on the street and 32psi at the track.
i heard dino dyno locks up on android 2.0 so i havent attempted to install it.
its closer then the dynolicios app that said i had 900 horsepower and 1200 ft/lbs torque.
i have read that these apps dont work correctly with cars that run high boost and im running 24psi on the street and 32psi at the track.
Last edited:
Queers4Gears
New Member
holy Fast and Furious !!!
i wished i had that much power.... on a real dyno i put 380hp 415ft/lbs torque. so id say its just off by a smidgin :blink:
What kind of rig are you runnning and what are your times at the track?
I posted a pic in the 'car thread' of my blown 4x4 extended cab... I ran 11.34/119.81 last month at Sacramento at ~11lbs.
its a 2002 VW GTI with the 1.8t and 6 speed from a 2002 VW Jetta GLI. Full bottom end build stock head APR stage 3+ turbo kit with a garrett GT28rs .86 a/r 76 trim turbo. plus other goodies. (no nitrous)
last time at the track i was running 16 PSI and i pulled a 11.90 @ 119 mph with a 1.7 60 ft time. now im running 22-24 psi on the street and if i have 100 oct ane can run 32PSI.
at 16 PSI i was putting 355hp and 320ft/lbs torque. i havent been back on the dyno with the higher boost levels or with the bottom end build. so i should be right at if not right above the 400 horse mark. The bottom end build did not add any power as i kept the same compression pistons i built it for strength and to keep it streetable.
heres a pic of the car i like to keep my stock/sleeper look http://www.droidforums.net/forum/off-topic-forum/177-cars.html#post2063
Last edited: