Unroot/Unbrick using .sbf post from -ikithme-

Discussion in 'Android Hacks and Help' started by Sam, Apr 14, 2010.

  1. Dukefrukem
    Offline

    Dukefrukem New Member

    Joined:
    Nov 23, 2009
    Messages:
    124
    Likes Received:
    0
    Trophy Points:
    0
    How do you do that?
  2. steveyos
    Offline

    steveyos New Member

    Joined:
    Aug 14, 2010
    Messages:
    29
    Likes Received:
    0
    Trophy Points:
    0
  3. kent747
    Offline

    kent747 New Member

    Joined:
    Aug 24, 2010
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    Two things - when I first tried this, it said "fail" every time, now my phone says battery too low to boot. If I just plug it in and the white light comes on, does that mean it's charging?​
  4. jmjbear
    Offline

    jmjbear New Member

    Joined:
    Aug 26, 2010
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    This is the best and most useful post that I have ever came across. One thing that I have experienced, is that if you don't have the USB drivers installed correctly to 2.0, it will fail when it tries to "Phone[0000]: Waiting for re-enumeration". Then it gets a 0x703e error message. After updating my laptop drivers to make it 2.0 - worked like a charm.
  5. Ataranine
    Offline

    Ataranine New Member

    Joined:
    Apr 20, 2010
    Messages:
    265
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    McLeansville, North Carolina
    I flashed the the 2.0.1 sbf like two hours ago and I haven't received the OTA update notification for 2.1/2.2...what the hell?
    When I did it before in the past using the 2.0.1 sbf, I'd get an OTA notification for 2.1 almost immediately after booting my phone for the first time... now I don't..
  6. xguntherc
    Offline

    xguntherc New Member

    Joined:
    Sep 5, 2010
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    0
    Go into dialer and type this
    *#*# CHECKIN #*#* this checks in and see's if there's an update! or go into settings and check for update.


    And now for my question. This entire thread. If I do this, I can still power on, and mess around with the phone right. I'm trying to fix a borked Droid but I'm not a verizon customer. So will i be stuck trying to activate it. or will it still work, just no network data?
  7. dboltz36
    Offline

    dboltz36 New Member

    Joined:
    Apr 5, 2010
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    0
    RSD lite FAIL

    I'm trying to get my droid 1 back to stock and I get all the way to when RSD lite says "waiting for re-enumeration", and it stays there for a little while and then says failed flashing process and has FAIL in the result column. I've been looking for help for this on droid forums and I can't seem to find a solution. Any suggestions?






    Thanks very much to anyone who replies
  8. hawkxcore
    Offline

    hawkxcore New Member

    Joined:
    Apr 15, 2010
    Messages:
    24
    Likes Received:
    0
    Trophy Points:
    0
    This is quoted from above.... Always a good idea to read thru the thread...

    "This is the best and most useful post that I have ever came across. One thing that I have experienced, is that if you don't have the USB drivers installed correctly to 2.0, it will fail when it tries to "Phone[0000]: Waiting for re-enumeration". Then it gets a 0x703e error message. After updating my laptop drivers to make it 2.0 - worked like a charm"
  9. thebarbrr
    Offline

    thebarbrr New Member

    Joined:
    Feb 23, 2010
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    0
    Omfg

    OMFG so i did 2.2 sbf to unroot and my RSD took forever then said FAIL!!! said that is was not flashed and then my phone said completed...booted back up and perfect! So people if you try this and it says fail, then you still may have a chance.
  10. xguntherc
    Offline

    xguntherc New Member

    Joined:
    Sep 5, 2010
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    0
    Where's the 2.2 sbf
  11. chomorro
    Offline

    chomorro New Member

    Joined:
    Nov 21, 2009
    Messages:
    317
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    San Diego
    So my screen broke and i flashed 2.2 stock to unroot it. RSD said everything was fine and then said to manually reboot the phone. Well i turn on the phone and i cant tell if it worked since i cant get screen capture to recognize the phone in sdk.

    Should i just try again? I didnt get a fail message, just a manually reboot phone message.
  12. xguntherc
    Offline

    xguntherc New Member

    Joined:
    Sep 5, 2010
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    0
    OK, so I finally decided to try this as I was able to get CM6 to boot once, and now I'm back to my old boot-loop problem.

    I ran the 2.0.1 sbf file and it got all the way to where it's supposed to boot and I STILL get a bootloop on the Red eye. RDS Lite does say Executed 100% but the result column still says in Process. and it says to Please manually power up the phone. That is because it's boot-looping. I think there might be a hardware problem.

    I just dont understand why after wiping, installing SPRecovery and flashing CM6 I was able to get it to actually boot once and work fine, and after i rebooted I'm boot-looping again. and now it's still doing it after a full sbf redo.. I think that was a lucky boot and the phones just messed up inside. but idk
    Last edited: Sep 9, 2010
  13. sbuikema
    Offline

    sbuikema New Member

    Joined:
    Mar 20, 2010
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    escanaba,mi
    will this bring me back to stock where i can get my phone warrantied? my screen is so loose it feels like its gonna fall out but when rooted the warranty is void. or will verizon be able to tell its been rooted?
  14. lousycreep
    Offline

    lousycreep New Member

    Joined:
    Jul 19, 2010
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    THANK YOU FOR THIS THREAD!!! Saved my droid. Now i can go back to messing with it!!
  15. dboltz36
    Offline

    dboltz36 New Member

    Joined:
    Apr 5, 2010
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    0
    How do you install your drivers to 2.0 though? I checked mine and I believe they're at like 6.x
  16. bucket8577
    Offline

    bucket8577 New Member

    Joined:
    Jan 31, 2010
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    0
    Won't update

    Hi. I applied VZW_A855_ESD20_QSC6085BP_C_01.3B.01P_SW_UPDATE.sbf successfully to unroot my phone. I attempted to update manually, but no success. It says "Android Update Requires a restart 77.0 MB" I click on Download, but it takes only a couple of seconds, then goes back to the above screen apparantly without downloading anything. I power the phone off, then back on. No update occurs.

    Please help.

    Thanks,

    Buck
  17. egarcia
    Offline

    egarcia New Member

    Joined:
    Sep 14, 2010
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    0
    Thank you very much worked out great!!!
  18. zpocbob
    Offline

    zpocbob New Member

    Joined:
    Mar 1, 2010
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    0
    I have followed the procedure here several times. I can flash recovery, install roms, but it goes back to bootloader every time i is turned on.

    Error when using RS Lite "Error switching phone to BP" Failed

    Tried Flashing
    FRG22D.sbf
    moto-droid2.01stock.sbf
    VZW_A855_ESD56_QSC6085BP_C_01.3E.01P_SW_UPDATE_03. sbf
    SPRecovery_ESE81.sbf

    HELP! This phone is not under warranty, or insurance.
  19. zorazz
    Offline

    zorazz New Member

    Joined:
    Jun 20, 2010
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    0
    I am having the same problems as zpocbob. Ive used rsdlite before to root my other droid successfully so i dont know what is going wrong this time. I have a refurb i am trying to take to completely stock but it always fails on BP passthrough mode. any hints or suggestions?


    UPDATE: I was able to get SPRecovery flashed and through it i mounted the SD card and put on a baseband upgrade and an entire rom. The ROM installed fine (UD) but when rebooted it went straight back to bootloader screen. I tried upgrading the baseband too, but it would error out on me every time.
    Last edited: Oct 13, 2010
  20. MolonLabe
    Offline

    MolonLabe New Member

    Joined:
    Feb 6, 2010
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    0
    I wanted to start fresh as I got very confused trying to go from a rooted 2.0.1 setup to a rooted 2.2 setup. I tried a bunch of different things and none of them really worked quite right. I feel like I "made a mess" with a bunch of unnecessary files and junk. So, anyway, I thought I'd use the method in this post, update to 2.2 and THEN root the phone. I just got done trying it and it looked okay, at first. I reactivated the phone successfully and the phone info says I'm running 2.0.1, build ESD56, kernel 2.6.29-omap1-g0dd7e0bandroidbuild@apa26 #511, baseband version c_01.3E.01P. However, I did get an error in RSD Lite v4.6 at the end of the flashing process. It reads:

    "Failed flashing process. Interface BP: Error sending RAM download for bootloader. Device API Error: 0xE0030009 Address: 0x152000 Command: ADDR (0xE0231009); phone connected"

    I wanted to know if anyone knew what this means or if it's something to worry about.

    I also realized that when I reboot in recovery mode, holding down the Vol+ and Camera buttons at the same time does not result in the new menu popping up. (Yes, I've tried multiple times and know that you have to get it just right). Any thoughts on why this might be and if there are any possible fixes?

    Thanks, guys!
Search tags for this page
download vzw a855 esd20 qsc6085bp c 01.3b.01p sw update.sbf
,
error switching phone to bp pass through mode
,
esd20/bp:c 01.3b.olp
,
generic failure when sending command.
,
getphoneid failed: error
,
how to install sbf file with sd card
,
how to unbrick droid x2
,
unbrick android 2.2.3
,
unbrick droid a855
,
unbrick droid incredible 2
,

unbrick droid x2

,
vzw a855 esd20 qsc6085bp c 01.3b.01p sw update.sbf