underclocking question

Discussion in 'Liberty ROM DX' started by dakotakid44, Jan 24, 2011.

  1. dakotakid44

    dakotakid44 Member

    Joined:
    Dec 14, 2010
    Messages:
    39
    Likes Received:
    0
    Trophy Points:
    6
    Ratings:
    +0
    I was just wondering what the best settings would be for underclocking with super low voltage at 800 MHz and 900 MHz. I would appreciate the help.
     
  2. thistle

    thistle Member

    Joined:
    Dec 23, 2009
    Messages:
    131
    Likes Received:
    0
    Trophy Points:
    16
    Ratings:
    +0
    Stable voltage/cpu freq combinations will differ for different units but it's pretty easy to find them. I use the following process:


    1. Get Droid Overclock
    2. Make one of your slots in Advanced/Custom the target cpu freq
    3. Set the voltage fairly high. Mine runs stable with 58 at 1GHz. You might try that as a start or use the default at 1GHz of 62 I believe.
    4. Make sure "Apply on boot" is not checked and hit "Apply Preset"
    5. Set your CPU Min/Max scaling to your target frequency and disable any profiles.
    6. Fire up SetCPU and run the Stress Test for a few minutes. If you see the spinning loop turtle or your phone freezes, your voltage is too low. Go to step #3 and increase by one. If everything keeps running, go to step #3 and decrease voltage by one.
    You can try Quick Clock but every voltage it's ever suggested to me has been too low or too high. They apply ok and the phone will run but under stress testing it locks up.
     
  3. mobile_sensei

    mobile_sensei Team Liberty
    Theme Developer Premium Member

    Joined:
    Sep 17, 2010
    Messages:
    917
    Likes Received:
    1
    Trophy Points:
    16
    Location:
    Land of Liberty
    Ratings:
    +1
    Agree

    Thats good advice Thistle. I use overclock for system permissions, etc. though now it is in Liberty. I run cpu voltages & speed at stock... :blackdroid: