1. DroidForums.net is currently undergoing a major software upgrade. If you are experiencing any problems logging in please: Contact Us

Testers Needed for new kernel version v3227 (MIUI Compatible)

Discussion in 'LithiumMod' started by jdlfg, Jan 9, 2011.

  1. jdlfg
    Offline

    jdlfg New Member

    Joined:
    Feb 16, 2010
    Messages:
    165
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    New York
    Im looking for a couple testers to run this new kernel version and report any bugs.z

    Standard voltage ( please read this thread http://www.droidforums.net/forum/droid-hacks/95404-low-voltage-causes-high-android-system.html) very informative thread.
    Scaling on demand by default
    Posting this one v3227 850 MHz standard voltage.

    http://dl.dropbox.com/u/6011176/v3227/jdlfg850-v3227-Jan-WEEK01-Sun-08_36AM.zip
    http://dl.dropbox.com/u/6011176/v3227/jdlfg1100-v3227-Jan-WEEK01-Sun-02_37PM.zip 1125 MHz tester

    http://dl.dropbox.com/u/6011176/v3227/jdlfg900-v3227-Jan-WEEK02-Thu-12_19PM.zip 900 MHz Tester

    http://dl.dropbox.com/u/6011176/v3227/jdlfg1100tester-v3227-Jan-WEEK02-Thu-05_29PM.zip 1100 MHz Tester


    More to come this is just a test run. I will also be working on kernels compatible with cm 7 rc's.

    Installation: Place on root of sd
    Boot into recovery or from rom manager install rom from sdcard.
    Install zip from sdcard
    Choose zip from sdcard
    select zip.
    Done.
  2. TMYINC
    Offline

    TMYINC New Member

    Joined:
    Sep 30, 2010
    Messages:
    377
    Likes Received:
    4
    Trophy Points:
    0
    I have ran your kernels a lot so I would be willing to give this one a try. I am actually on MIUI 1.1.7.0 right now so it would be a good time to try it out!
  3. boostedhonda
    Offline

    boostedhonda New Member

    Joined:
    Sep 13, 2010
    Messages:
    259
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    740
    Gonna try this out in about 10 minutes. Ill report results at the end of the day.

    Sent From My Gingerbread Droid 1
  4. boostedhonda
    Offline

    boostedhonda New Member

    Joined:
    Sep 13, 2010
    Messages:
    259
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    740
    Well results weren't too good for me. On froyo and gingerbread it locks the phone up as soon as the phones finished booting up. Kinda weird because I've never had a problem with my phone using a kernel. I'm thinking since its after its done booting its like setcpu is locking it up as soon as it gains su permission. Ill try again in a lil bit without setcpu on.

    Sent From My Gingerbread Droid 1
  5. jdlfg
    Offline

    jdlfg New Member

    Joined:
    Feb 16, 2010
    Messages:
    165
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    New York
    Which build?
    Setcpu to. Ondemand@boot
  6. TMYINC
    Offline

    TMYINC New Member

    Joined:
    Sep 30, 2010
    Messages:
    377
    Likes Received:
    4
    Trophy Points:
    0
    I would say make sure all of your presets from the previous kernel are off before flashing. Anything that has "Set on boot" checked might cause it to bootloop. Not sure if that is the problem, just a thought I had.
  7. TMYINC
    Offline

    TMYINC New Member

    Joined:
    Sep 30, 2010
    Messages:
    377
    Likes Received:
    4
    Trophy Points:
    0
    So far everything is going well on MIUI v1.1.7.0. Have it set to On demand, sampling rate at 30000 and up threshold set to 51%. Screen off is set to min 300 and max 450 as well as the charging profile. So far no hiccups and no heat issues. I will continue to run it the rest of the day to observe battery life and such. Im looking forward to the rest of these kernels. Hopefully they will be updated on Rom Manager also. Thanks jdlfg for such awesome kernels.
  8. SSHGuru
    Offline

    SSHGuru New Member

    Joined:
    Nov 23, 2009
    Messages:
    3,839
    Likes Received:
    30
    Trophy Points:
    0
    Location:
    Fort Lauderdale
    jd,

    Are you running a MIUI ROM over a Lithmod rom? If so why? Should we try it out?
  9. TMYINC
    Offline

    TMYINC New Member

    Joined:
    Sep 30, 2010
    Messages:
    377
    Likes Received:
    4
    Trophy Points:
    0
    I was just thinking that he posted here since he supports LithiumMod and his kernels are usually what comes with Lithium Roms by default.
  10. jdlfg
    Offline

    jdlfg New Member

    Joined:
    Feb 16, 2010
    Messages:
    165
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    New York
    I have my Droid 1 laying around. It is not my everyday phone. However, I am not running MIUI but made these kernels compatible for the MIUI build at the request of a few friends. My D1 has lithmod installed. These kernels are built with standard voltages across the board. I am sure that they will show significant results in battery life and performance once released officially.
  11. TRIKOTRET
    Offline

    TRIKOTRET New Member

    Joined:
    May 25, 2010
    Messages:
    1,459
    Likes Received:
    6
    Trophy Points:
    0
    I flashed these kernels on the new miu build 1.7. so far so good. I am using setcpu with on demand settings. Now the key is battery life on this baby. Ill post later with results. I usually use chevey med voltage 800mhz and get battery life for average usgage about 16hours.
  12. SSHGuru
    Offline

    SSHGuru New Member

    Joined:
    Nov 23, 2009
    Messages:
    3,839
    Likes Received:
    30
    Trophy Points:
    0
    Location:
    Fort Lauderdale
    I'll look forward to being able to use these on lithmod. Will you be posting them on Rom Manager for us when they are stable?
  13. jdlfg
    Offline

    jdlfg New Member

    Joined:
    Feb 16, 2010
    Messages:
    165
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    New York
    Once stable I will post in rom manager and here.
  14. TRIKOTRET
    Offline

    TRIKOTRET New Member

    Joined:
    May 25, 2010
    Messages:
    1,459
    Likes Received:
    6
    Trophy Points:
    0
    Here's an update. After I fully charged my phone, I wiped battery stats in recovery and then booted. My phone locked up the minute it finished booting up. I pulled the battery out and tried again. But it kept locking up. So I reflashed another kernel in recovery and phone working now. Look forward to testing another kernel.

    Sent from my Droid using DroidForums App
  15. Jasonjohns
    Offline

    Jasonjohns New Member

    Joined:
    Sep 23, 2010
    Messages:
    371
    Likes Received:
    0
    Trophy Points:
    0
    I've been running the kernel since you posted it. With UD3, haven't had any problems with it. Battery life seems the same but it's still early. Performance has been good.
    Think I can get a faster one: 1100 maybe?
  16. jdlfg
    Offline

    jdlfg New Member

    Joined:
    Feb 16, 2010
    Messages:
    165
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    New York
    On which build?
    Disable setcpu on boot or set to Ondemand before flashing.
  17. SSHGuru
    Offline

    SSHGuru New Member

    Joined:
    Nov 23, 2009
    Messages:
    3,839
    Likes Received:
    30
    Trophy Points:
    0
    Location:
    Fort Lauderdale
    I'm using your old 1200 one and never have a problem with overheating. Please include one that goes that fast in the new bunch.
  18. TRIKOTRET
    Offline

    TRIKOTRET New Member

    Joined:
    May 25, 2010
    Messages:
    1,459
    Likes Received:
    6
    Trophy Points:
    0

    on the latest miu build. yeah i had setcpu set on demand before i flashed. I tried again but i realized it only freezes when I turn on wifi. It will scan then wifi turns off and phone locks :icon_eek:
  19. TMYINC
    Offline

    TMYINC New Member

    Joined:
    Sep 30, 2010
    Messages:
    377
    Likes Received:
    4
    Trophy Points:
    0
    I have ran this all day with the newest MIUI build and it has ran great! Makes me happy because before I couldn't use these kernels with MIUI and are the only ones that have a min of 300mhz besides a few 1200mhz or above kernels. Im on the newest Bugless Beast now so I am going to try it with it too. I have been using Webster's CM kernel lately and the Milestone overclock app for some testing so it is nice to try something else out for a change. Thanks for your hard work jdlfg!
  20. amosavitas
    Offline

    amosavitas New Member

    Joined:
    Feb 27, 2010
    Messages:
    342
    Likes Received:
    4
    Trophy Points:
    0
    Oh man, I can't tell you how excited I was to see a new jdflg kernel, and 1125 to boot. Running smoothly on BB 6.2.1. I flashed ramswap but cannot enable compcache, must not be that simple. From the standpoint of speed and responsiveness this is the best kernel I have ever used, thank you.