Repairing Screen

Discussion in 'Droid RAZR' started by logdeezylax6, Mar 19, 2012.

  1. logdeezylax6

    logdeezylax6 New Member

    Joined:
    Mar 19, 2012
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    Screen is cracked, trying to figure out if the digitizer can be replaced by itself or if I need to get a new lcd. Are the two fused together?? Any help would be great. Thanks

    L
     
  2. FoxKat

    FoxKat Premium Member
    Premium Member

    Joined:
    Apr 2, 2010
    Messages:
    14,808
    Likes Received:
    4,748
    Trophy Points:
    838
    Location:
    Pennsylvania
    Ratings:
    +5,287
    Current Phone Model:
    Droid Turbo 2 & Galaxy S7
    From what I've seen the two can be bought either as a pair which are fused together by what is probably a perimeter double-sided adhesive layer, or separately. The problem is, if the adhesive layer between the two is even slightly damaged while separating them, the new replacement may not seat properly and at best you may get dust collecting between them, and at worst it could apply uneven pressure on one or the other resulting in another broken component at some point down the road. I'd go the safe route and get the pair as one already fused together.

    Good luck! ;)
     
Search tags for this page
android fusion screen broke
,

android fusion screen replacement

,
droid razr lcd layers
,
droid razr replacement screen
,
fusion screen replacement android
,
how to replace a phone screen on an android fusion 2
,
how to replace a screen on an android fusion phone
,
how to replace android fusion screen
,
is the motorola droid x lcd fused to the touch screen
,
lcd screen replacement kit for fusion 2 android