QPST Drivers and Manual PRL Update

Discussion in 'Android Hacks and Help' started by Navalynt, Apr 15, 2010.

  1. Navalynt

    Navalynt Member

    Joined:
    Apr 13, 2010
    Messages:
    86
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Anchorage, AK
    Ratings:
    +0
    I'm actually trying to program the Droid to work on another carrier. The problems I'm running into getting started are that I can't seem to get QPST to recognize the phone and I don't know how to manually update the PRL from a file without QPST.

    Currently I have the Droid plugged into USB with USB Debugging ON and it shows as an Android ADB Interface device. How do I get it into a "modem mode" so there is a COM port I can see from QPST?
     
  2. mwhartman

    mwhartman Super Moderator/RS Premium Member

    Joined:
    Jan 15, 2010
    Messages:
    10,737
    Likes Received:
    12
    Trophy Points:
    153
    Location:
    South FL
    Ratings:
    +12
    Wow, your question is above my knowledge base. Good luck.

    Mike
     
  3. thatguychuck

    thatguychuck Member

    Joined:
    Oct 31, 2009
    Messages:
    433
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    SD
    Ratings:
    +0
    I only briefly tried to do this, so it may not be of much help. I THINK, if you boot into "factory test mode," it will open the port of 5555 (Power on while holding "t") There are no on screen notifications to let you know you are in factory test mode. Then you need to use a different program to create a "virtual port" for the COM that QPST can use to connect with. That's about as far as I got, and I never quite got it to work successfully. Good luck, hopefully somebody out there knows more than I!
     
  4. teddyearp

    teddyearp Senior Member

    Joined:
    Jan 13, 2010
    Messages:
    1,802
    Likes Received:
    6
    Trophy Points:
    68
    Location:
    Randle, WA
    Ratings:
    +6
    Current Phone Model:
    Motorola XT1103 (Nexus 6)
  5. Navalynt

    Navalynt Member

    Joined:
    Apr 13, 2010
    Messages:
    86
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Anchorage, AK
    Ratings:
    +0
    Thank you all for the help! THIS specific post on HowardForums showed me how to get my Droid connected in test mode so I could connect to QPST and update the PRL. There is a member on that board who volunteered to help me with the hex editing of the files to get EVDO working as well.

    Once I have my Droid fully functional I'll post something of a more in-depth tutorial in the forums here.
     
  6. Dri94

    Dri94 Member

    Joined:
    Aug 15, 2011
    Messages:
    47
    Likes Received:
    1
    Trophy Points:
    8
    Ratings:
    +1
    any update ?
     
Search tags for this page
android qpst
,
cargar prl con qpst
,
motorola a955 prl
,

qpst

,
qpst manual
,
qpst manual pdf
,
qpst motorola droid
,
qpst troubleshooting
,
qpst tutorial
,
samsung service mode drivers qpst