Post Your Droid's Idling Temp

Discussion in 'Android Roms' started by leroi09, May 28, 2010.

  1. leroi09
    Offline

    leroi09 New Member

    Joined:
    Feb 20, 2010
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    0
    I have been curious to see what other peoples droids run at temp wise. List your droid's idling temp in C as reported by setCPU CMOS, ROM, Kernel and speed, and theme.

    27 C
    CyanMod 5.07.1
    Bekit LV 1200 set btw 800-1100 on demand
    DroTheme

    By idle I took my reading after some light use when coming out of standby.

    Sent from my Droid using Tapatalk
  2. lee__D
    Offline

    lee__D New Member

    Joined:
    May 21, 2010
    Messages:
    246
    Likes Received:
    0
    Trophy Points:
    0
    pete's stock 2.1 rooted
    P3 1200mhz kernel
    set to 1000/250 performance

    24 C
  3. gatewayad
    Offline

    gatewayad New Member

    Joined:
    Nov 6, 2009
    Messages:
    521
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    St. Louis, MO
    24.0 C (75.2 F) OMAP3 Temp Sensor on SS 3.1 set at 550/1000
  4. TAPOUT27
    Offline

    TAPOUT27 New Member

    Joined:
    Feb 3, 2010
    Messages:
    2,368
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    BRENTWOOD, TN
    currently....

    experimental release of Steam ROM
    Stock 1.2 ghz kernel (included) Bekit
    idle: 26 c highest: 40 c
    running temp monitor and setCPU
  5. mr2man07
    Offline

    mr2man07 New Member

    Joined:
    Dec 15, 2009
    Messages:
    44
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Des Moines
    250/800
    34c
    Jakes 1000 kernel on Dominator 3
  6. shmoo
    Offline

    shmoo New Member

    Joined:
    Jan 24, 2010
    Messages:
    423
    Likes Received:
    0
    Trophy Points:
    0
    Running Steam ROM
    Bekits 1100 LV kernel
    25c after light use. Using SetCpu

    The lowest I've ever had was -3c in february just sitting on my desk
  7. marcogiudice
    Offline

    marcogiudice New Member

    Joined:
    Jan 11, 2010
    Messages:
    199
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Jupiter, FL
    Ultimate droid's 1.25 new era,
    1.2ghz p3 kernel @ 1200/250 ondamand
    idles at 80f cpu and 84 battery
    after light use i can be in high 90's for both cpu and battery

    New Era 1.25 is the sickest rom out there, if you dont have it what are you waiting for!
    i dont know why anyone would waste there time on any other rom
    blackdroid, makes the smoothest most stable rom out there with the most features i must add!
    Last edited: May 28, 2010
  8. Taegost
    Offline

    Taegost New Member

    Joined:
    May 16, 2010
    Messages:
    688
    Likes Received:
    1
    Trophy Points:
    0
    Location:
    Tampa Bay, Fl
    Using Cyanogenmod 5.0.7.1 and bekit 1.2GHz 7-slot low voltage kernel with Setcpu at 250/1.2 I'm idling at 91.4f right now using Tapatalk

    My Droid Does Tapatalk...
  9. mrgarrison
    Offline

    mrgarrison New Member

    Joined:
    Mar 24, 2010
    Messages:
    310
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Portland, OR
    i have bb1.1 with 250/1000mhz and i am usually around 77-80F idle.
  10. The Rick
    Offline

    The Rick New Member

    Joined:
    Feb 17, 2010
    Messages:
    175
    Likes Received:
    0
    Trophy Points:
    0
    mine is usually around 28-30c for idle and about 33-38c under use
    This is with bb1.0 with the 1ghz kernal

    The best consistent temps I ever got were with UD6.x. It would consistently idle around 15-20c but it obviously had tons of other bugs that were terrible
  11. winner00
    Offline

    winner00 Premium Member Premium Member Developer

    Joined:
    Nov 15, 2009
    Messages:
    1,112
    Likes Received:
    10
    Trophy Points:
    0
    Location:
    Utah
    18-20C
    Dominator 3.0 beta
    P3Droid 1.2ghz LV 250-1200 ondemand
    Dark Edge Blue
  12. borgey401
    Offline

    borgey401 New Member

    Joined:
    Apr 19, 2010
    Messages:
    112
    Likes Received:
    0
    Trophy Points:
    0
    18-20 c bugless beast 1.1 with bekit 1.0 GHZ 7 slot LV kernel
  13. jbg25
    Offline

    jbg25 New Member

    Joined:
    Jan 1, 2010
    Messages:
    560
    Likes Received:
    0
    Trophy Points:
    0
    CM 5.0.7.1 (jrummy and nate remix NexTheme)
    Bekit SV 1100 kernel ... setcpu 550/1100 on-demand
    auto-killer set on aggressive
    15C when idle!
    21C after short bench
    22C after long bench
    30C after 144028 ms stress test
    Last edited: Jun 1, 2010
  14. rustynail09
    Offline

    rustynail09 New Member

    Joined:
    Apr 8, 2010
    Messages:
    111
    Likes Received:
    0
    Trophy Points:
    0
    Stock ESE81 (black glass theme by 928droid)
    ChevyNo1 LV 7slot 1gh wifi enabled Set to 250/800 on demand
    < 30c under normal idle battery around the same

    44c after a 121696 ms stress test
  15. Psychlone
    Offline

    Psychlone New Member

    Joined:
    Dec 8, 2009
    Messages:
    132
    Likes Received:
    0
    Trophy Points:
    0
    WtH? You guys all on the side of the planet that's winter?

    My MotoDroid is:
    JRummy/n8 Remix 0.8 Blue
    P3 7 Slot 1000Mhz LV Kernel (running at 600/250)

    Idle: 30*C (after waking up from an all-night sleep)
    Load: 46*C (after watching video for a half hour)

    Almost the same exact temps with Bekit's 7 Slot 1100MHz Kernel
    (changed to P3 while testing for battery life- which is a good question, I've been getting better battery life with the P3 kernels...anyone else??)

    Psychlone

    ***EDIT
    I realized that there are a few people in this thread (and elsewhere) that post their temps in *F. This is ok, and understandably you're in the US like myself...but the entire rest of the world uses *C, so I've found that it's easier to just get used to showing people temps in *C rather than *F. This way, everyone knows exactly what temp it is without having to do a conversion, and ALL monitoring software (be it on your computer, your toaster or your phone) has both *C and *F, so it's an easy change.
    If we all used the Fahrenheit scale, then it wouldn't matter at all, but it's just us in the USA that use it and the rest of the entire planet uses Celcius (well, for the most part, eh? ;))
    It's just easier to communicate when we're all talking the same language...you never know if someone from the other side of the world is capable of helping, but if they don't understand *F, they probably aren't going to go through the trouble of converting it just to tell you that your CPU is going to fry.
    Last edited: May 31, 2010
  16. Twista89
    Offline

    Twista89 New Member

    Joined:
    May 23, 2010
    Messages:
    71
    Likes Received:
    0
    Trophy Points:
    0
    Using BBV1.0 with the 800mhz kernel I would see temps idling in the 30-35C range and high usage would take it up to 48C

    Using BBV1.1 with Chevys LV 1000mhz 5slot kernel temps now drop to around 26-28C and high usage would be around 40-44C

    I want lower temps so on with more testing!!!!
  17. KpAtch3s
    Offline

    KpAtch3s New Member

    Joined:
    May 27, 2010
    Messages:
    48
    Likes Received:
    0
    Trophy Points:
    0
    Just rooted my droid (for the first time) about 2 hrs ago with BBv1.1 and OC'ed with BeKits 1Ghz LV 7x

    Idle: 21 C
    Load:42 C (after playing some Homerun Battle 3D and a 5min video clip)
  18. PolyOlefin
    Offline

    PolyOlefin New Member

    Joined:
    Dec 3, 2009
    Messages:
    190
    Likes Received:
    0
    Trophy Points:
    0
    Stock OTA 2.1 ROM
    ChevyNo1's 7-slot LV kernel
    900Mhz Max/125Mhz Min

    Always idles between 21-31°C. The phone lives in my pocket.
    Last edited: Jun 3, 2010
  19. Tallica
    Offline

    Tallica Premium Member Rescue Squad Premium Member

    Joined:
    Mar 17, 2010
    Messages:
    3,259
    Likes Received:
    0
    Trophy Points:
    36
    Location:
    Middleboro, MA
    Don't know if we are talking Batt. or Cpu temps, but:

    My sig says what I'm running although I'm usually using the 250/1000 slots, running pete's script and Setcpu

    Idle:

    Cpu-18-20c
    Batt-28-30c
  20. scubasteve101
    Offline

    scubasteve101 New Member

    Joined:
    Apr 1, 2010
    Messages:
    56
    Likes Received:
    0
    Trophy Points:
    0
    So how does everyone's phone idle around 21C? Its around 23C in my house (75F), either you guys keep a really cold house or your phone idles lower than the ambient temperature which makes no sense to me, anyone care to explain?

    Btw,
    BBv1.1 Nextheme
    p3droid 1000Ghz lv
    setcpu 250-1000 on demand
    idle: 29C with no use for the last 45 mins
Search tags for this page

droid 3 34c