Please help...stuck at logo

Discussion in 'Liberty ROM DX' started by Smack77, May 30, 2011.

  1. Smack77
    Offline

    Smack77 New Member

    Joined:
    Sep 19, 2010
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    0
    I've been on version 0.5 and sbf'd back to stock, then rooted, then to Liberty 2.01. After seeing .6 released I decided to install .1 and then go to .6.

    I installed .1 I checked the backup and wipe cache but now I'm stuck at the logo and can't seem to get into a recovery mode by pushing the home and power or camera and power.

    Any help on this?

    Thanks
  2. berto1014
    Offline

    berto1014 New Member

    Joined:
    Apr 21, 2011
    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    0
    SBF again. Are you still able to get to the bootloader?

    To do so press and hold camera button, volume down button, and then the power button at the same time when phone is off. It will boot into the bootloader (a black screen with some information). Leave it on this screen and plug it in to your computer via usb, and use RSD lite to sbf.

    You will have to factory restore after the SBF. Then root again, download toolbox, and use the full install directly to 0.6. 0.6 includes the latest .596 kernel and all software.

    Hopefully this helps.
    Last edited: May 31, 2011
  3. Smack77
    Offline

    Smack77 New Member

    Joined:
    Sep 19, 2010
    Messages:
    46
    Likes Received:
    0
    Trophy Points:
    0
    Thanks...I had to go through the SBF path.
  4. Sithlrdvad
    Offline

    Sithlrdvad New Member

    Joined:
    Dec 24, 2010
    Messages:
    47
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Southern California
    I went into a bootloop yesterday with .05.

    What worked for me, without knowing was this: Cell off, connect to ac adapter, turn cell on, once i saw the battery green logo I press power again and it turn on into Bootstrap.

    There I was able to flash a back up.