quadjacks
Member
- Joined
- Jan 11, 2010
- Messages
- 256
- Reaction score
- 0
1. Download the following files:
2. Connect your phone to USB and turn it off then while your phone is booting hold up on the DPAD.
3. Run RSD Lite 4.6 as Administrator (For all you Vista and 7 folks out there. If you are using XP you may not need to run as Administrator)
4. Click the ... next to the filename box and browse to where you saved the .sbf file and double click the .sbf file.
5. Hit start and below it should give you completion progress and all of that.
6. Once your phone is done being flashed (It may take a while so don't unplug it) it will reboot and you will be back at stock 2.1 no root.
7. Once you are back to stock 2.0.1, OTA will do it's do!
done!
Code:
[URL="http://rescue.macleod-web.net/rsd_lite/RSDLite4.6.zip"]RSD Lite[/URL]
[URL="http://rescue.macleod-web.net/rsd_lite/USB_Drivers_32_bit_4.2.0.zip"]32 bit drivers[/URL] [B] or[/B] [URL="http://rescue.macleod-web.net/rsd_lite/USB_Drivers_64_bit_4.2.0.zip"]64 bit drivers[/URL]
[URL="http://rescue.macleod-web.net/sbf/moto-droid2.01stock.sbf"][SIZE=2]2.01 stock sbf file[/SIZE][/URL]
- Install RSD Lite. Unzip the file and run the msi file
- Install the drivers.
- place downloaded .sbf file on desktop
2. Connect your phone to USB and turn it off then while your phone is booting hold up on the DPAD.
3. Run RSD Lite 4.6 as Administrator (For all you Vista and 7 folks out there. If you are using XP you may not need to run as Administrator)
4. Click the ... next to the filename box and browse to where you saved the .sbf file and double click the .sbf file.
5. Hit start and below it should give you completion progress and all of that.
6. Once your phone is done being flashed (It may take a while so don't unplug it) it will reboot and you will be back at stock 2.1 no root.
7. Once you are back to stock 2.0.1, OTA will do it's do!
done!
Last edited: