path saver help!

[striker85]

Worth a shot

Sent from my DROID BIONIC using DroidForums

 

[BlueSami]

Tried another computer, still the same thing. It must be my phone.
does it have to do with safestrap? this is getting frustrating now.

 

[striker85]

When i installed safestrap and then later decided to revert to stock, there were many issues as a result. However, i didn't have any problems with the phone simply being recognized by the computer. If you are using the stock cable and have the necessary drivers installed and are connected with the phone booted up and in charge only then I'm not sure what the problem is.

That being said, unless you significantly altered or broke the phone i see no reason you would have such trouble getting the computer to recognize it. You have triple checked to make sure usb debugging is enabled?

Sent from my DROID BIONIC using DroidForums

 

[BlueSami]

How do I revert to stock now?

I did some research seems like other people have this issue.

Sent from my DROID BIONIC using DroidForums

 

[striker85]

I'd say first step is uninstall safestrap since the whole two roms thing might mess with it

Sent from my DROID BIONIC using DroidForums

 

[BlueSami]

So if I uninstall safestrap should I install bootstrap?

Sent from my DROID BIONIC using DroidForums

 

[striker85]

Hopefully someone more knowledgeable on bootstrapping the bionic will chime in.

Sent from my DROID BIONIC using DroidForums

 

[nesquik]

You may want to try fist copying over the two update files (893 and 901) as well as the radio.zip file on your internal storage . Then put your phone in fastboot mode (hit power as well as holding down vol up and down) and choosing the fastboot option. Run the runmebbb.bat file which will first tell u it could not copy the update files. Since you already copied them just ignore the error. If that goes well it should wipe everything and result in stock firmware with no radio. You then need to restart the phone using the fast-boot option again but this time you will choose recovery. Flash the radio.zip file and reboot phone once agian.

Once all of that is finished you can then run the runmebbb.bat again which will pretty much do the whole process again but you will most likely not run into any more errors and you can follow the tutorial I linked earlier.

This may be a little backwards but I have done this a few times when I was in the bricked stage with safe strap corrupted.

Nesquik

 

[whetrick1]

try going to droid bionic root.com modderx has a video on how to use pathsaver

 

[whetrick1]

try going to droid bionic root.com modderx has a video on how to use pathsaver

 

[BlueSami]

so I am kinda an idiot.
when i had been trying rsd lit. I wasn't in fastboot!!! DOH!

still i don't understand why the path saver wasn't seeing my phone..