1. DroidForums.net is currently undergoing a major software upgrade. If you are experiencing any problems logging in please: Contact Us

need some help going back to stock

Discussion in 'Motorola Droid 3' started by acoers, Nov 17, 2011.

  1. acoers
    Offline

    acoers New Member

    Joined:
    Jul 26, 2011
    Messages:
    239
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Illinois
    i tried putting safestrap on and when i shut my phone off and turn it back on it keeps going into bootloop. I can go to the power x menu and do a factory reset but it bootloops. also when i get to the splash screen and hit the soft key menu it goes to bootloop. and on the screen it says missing bitmap indetermente1(code1). When i hit the power m it goes to the boot mode menu and i tried every option i could in it and it just keeps bootlooping. Any ideas how i could just get the phone back to stock and start over again or just be able to turn it on? Well i tried doing the ultimate unbricker and got it to work till it got to writing preinstall, sending cdrom and radio and it said battery was low. So if i plug in my phone does it still have the ability to charge?
    Last edited: Nov 17, 2011
  2. acoers
    Offline

    acoers New Member

    Joined:
    Jul 26, 2011
    Messages:
    239
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Illinois
    well got it back to stock, had to put in a charged battery. i ended up reflash it back to stock