[Kernels] 3/24/11 - Froyo/Gingerbread

Discussion in 'ChevyNo1' started by ChevyNo1, Mar 25, 2011.

  1. ChevyNo1
    Offline

    ChevyNo1 Premium Member Premium Member Developer

    Joined:
    Dec 28, 2009
    Messages:
    5,354
    Likes Received:
    5
    Trophy Points:
    153
    Ratings:
    +5
    This is the same series of kernels present starting with SS 5.2 - the benefit of these kernels over my others is that (by default) logging is disabled. You can turn on logging by using the logging.ko that is present in the zip, which will go to /system/lib/modules with the others. However - unless you need to debug (ie. run a logcat) it is just taking up precious power.

    And YES - these will work for both Froyo AND Gingerbread. Included in the zips are most common filesystem drivers as well. If you do not know what they are, you do not need them ;)

    Standard rules apply - if you load up, and get stuck at the 'M' - first wipe CACHE. If still stuck - try a different kernel.

    Compcache is supported within these kernels - however, if you are using a non-SS ROM and have problems - you need to speak with that ROM's dev, as most of the work for compcache is in the ROM itself.

    Kernels
     
  2. ronaldramsayii
    Offline

    ronaldramsayii Member

    Joined:
    May 27, 2010
    Messages:
    229
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Atlanta, GA
    Ratings:
    +0
    Thanks a lot man! I asked an ETA, it came a few minutes later lol.
     
  3. ChevyNo1
    Offline

    ChevyNo1 Premium Member Premium Member Developer

    Joined:
    Dec 28, 2009
    Messages:
    5,354
    Likes Received:
    5
    Trophy Points:
    153
    Ratings:
    +5
    I'm quick like that, ha ha!
     
  4. hrdnhvy
    Offline

    hrdnhvy Member

    Joined:
    Mar 13, 2010
    Messages:
    613
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    WI
    Ratings:
    +0
    Wow, the first improvement I am noticing right now are how cool my phone is staying, I dl'd the 1.25 first & installed it, then I clocked it @ 250-1.25, & with my phone plugged in charging I began dl'ing all the kernels to my sd card, & my phones did not seem to go up in temp at all, typically in that situation, while plugged in & dl'ing files back to back my ph temp would go up very noticably, but not with these, its still to early to give any long term feedback, but right now im impressed....awsome work as usual Chevy !!
     
  5. dwoid
    Offline

    dwoid Member

    Joined:
    Feb 4, 2010
    Messages:
    304
    Likes Received:
    0
    Trophy Points:
    16
    Ratings:
    +0
    Hi Chevy,

    These are great. I went directly to the 1.25/7-slot/ULV and have been playing with it. *All the slots are right*, thank you very much :). And it's running cool and fast at least on my older Droid1, and I'm pretty confident it will run as well on the newer one.

    Btw, the camera works!

    Thank you HUGELY for all the great work!

    -- Dwoid

    dancedroid
     
  6. ChevyNo1
    Offline

    ChevyNo1 Premium Member Premium Member Developer

    Joined:
    Dec 28, 2009
    Messages:
    5,354
    Likes Received:
    5
    Trophy Points:
    153
    Ratings:
    +5
    You're welcome, glad you are having good results with them!
     
  7. vbhokiefan
    Offline

    vbhokiefan Premium Member Theme Developer Premium Member

    Joined:
    Mar 4, 2010
    Messages:
    934
    Likes Received:
    8
    Trophy Points:
    18
    Location:
    VA Beach VA
    Ratings:
    +8
    Rocking the 1.1Ghz LV kernel (my phone's fav!) hese are slick - Fast and Cool, just like I like....another quality product from Chevy!
     
  8. tbone73
    Offline

    tbone73 Member

    Joined:
    Jun 11, 2010
    Messages:
    791
    Likes Received:
    0
    Trophy Points:
    16
    Ratings:
    +0
    I installed a 1.2GHz kernel one of these new ones and phone rebooted twice already during a bench test. I think im going back to the logging type of kernel.
     
  9. ChevyNo1
    Offline

    ChevyNo1 Premium Member Premium Member Developer

    Joined:
    Dec 28, 2009
    Messages:
    5,354
    Likes Received:
    5
    Trophy Points:
    153
    Ratings:
    +5
    The ONLY difference is logging - do not see how that could cause a reboot - however - whatever works!
     
  10. tbone73
    Offline

    tbone73 Member

    Joined:
    Jun 11, 2010
    Messages:
    791
    Likes Received:
    0
    Trophy Points:
    16
    Ratings:
    +0
    I went back to the 3-9-2011 kernels that are liquid compatible and it seems to be ok. I'm getting 1025 at 700MHz max and 1500 at 1200GHz. I have all the kernels on my SD card just in case I or other people need them :)
    Nice right!!!
    thanks Chevy!!!!!
     
  11. navenedrob
    Offline

    navenedrob New Member

    Joined:
    Jun 16, 2010
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    Chevy, do these kernels support init.d custom script loading? I know that you probably provided these along side your SS ROM built using CM source, so I am assuming that they do indeed support this method. If you could just confirm that for me, that would be great. I'm setting up this method alongside an AOSP source build, and I could throw in some extra performance enhancements using this method of script loading. Thanks!
     
  12. noiofnine
    Offline

    noiofnine Member

    Joined:
    Jun 21, 2010
    Messages:
    105
    Likes Received:
    0
    Trophy Points:
    16
    Ratings:
    +0
    Not sure if this posted correctly under the buglist section. Apologize for dup post if so. But installed and flashed both ulv and lv of 1.25, 1.2 1.1 and 1.0. Seems to runn very hot when not doing much and ezpecially when using the browser gets very hot and then system freezes. Went back to 03/09/11 kernel of 1.0 and its back to normal now.
    Tried to find them but server down.... looks like been removed. Would like to put 1.25 on if I can.

    Sent from my Droid using DroidForums App
     
  13. neoaeon
    Offline

    neoaeon New Member

    Joined:
    Mar 27, 2011
    Messages:
    17
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    Hey Chevy, how do I go about loading logging?

    I `insmod /system/lib/modules/logger.ko` but I still don't have a /sys/kernel/debug, which I assume I need for aLogCat?

    Just trying to get a logcat with the newer kernel.

    Thanks for the work BTW, great kernel.
     
  14. DanWiz
    Offline

    DanWiz New Member

    Joined:
    Mar 26, 2011
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Ohio
    Ratings:
    +0
    Im running CM7 RC2 with chevy 1.1GHz ULV, when i try and verify compcache is running i.e. su /system/bin/compcache stats
    i get 'cd: cant cd to /sys/block/zram0'

    Is anyone else getting this error? maybe its a CM thing?
     
  15. ChevyNo1
    Offline

    ChevyNo1 Premium Member Premium Member Developer

    Joined:
    Dec 28, 2009
    Messages:
    5,354
    Likes Received:
    5
    Trophy Points:
    153
    Ratings:
    +5
    Yes they do!
     
Search tags for this page

chevy kernel download

,
chevy kernel droid download
,
chevycam droid 3 kernel
,
chevyno1 kernels
,
droid x custom kernel download
,
gingerbread kernel download for droid 3