Kernal for .7

Discussion in 'cvpcs' started by mrdroid, Jul 6, 2010.

  1. mrdroid
    Offline

    mrdroid Member

    Joined:
    Dec 16, 2009
    Messages:
    511
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Pittsburgh, PA
    Ratings:
    +0
    Is there any way to get the Bekit kernal on the .62 release into .7?

    I can't change the kernal at all on .7 for some reason. And the p3 kernals run like crap on my device and super hot. Bekit's run about 10c cooler.
     
  2. hailtothetheif83
    Offline

    hailtothetheif83 Active Member

    Joined:
    Jan 19, 2010
    Messages:
    1,020
    Likes Received:
    0
    Trophy Points:
    36
    Location:
    Temecula, Ca
    Ratings:
    +0
    Same here since switching to the P3 kernels for Sapphire my phone has been running really hot I tried the LV and SV ones made just for Sapphire... usually use Chevy's with no heat issues
     
  3. mph122074
    Offline

    mph122074 Member

    Joined:
    Mar 13, 2010
    Messages:
    133
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Falls Church, VA
    Ratings:
    +0
    Last edited: Jul 6, 2010
  4. mph122074
    Offline

    mph122074 Member

    Joined:
    Mar 13, 2010
    Messages:
    133
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Falls Church, VA
    Ratings:
    +0
    Sorry guys I couldnt find it...Have you tried the new ones that were posted yesterday???

    I will try to find the link...
     
  5. mph122074
    Offline

    mph122074 Member

    Joined:
    Mar 13, 2010
    Messages:
    133
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Falls Church, VA
    Ratings:
    +0
    these are the ones that are specific to this ROM...

    p3designs.info/sapphire/

    I have been running the 1100 standard voltage 2 days now and have not had any heating problems or any battery problems. Have been on my phone all day and it has been unplugged since 7 this morning and still have 50% left...
     
  6. hailtothetheif83
    Offline

    hailtothetheif83 Active Member

    Joined:
    Jan 19, 2010
    Messages:
    1,020
    Likes Received:
    0
    Trophy Points:
    36
    Location:
    Temecula, Ca
    Ratings:
    +0
    I'm going to try the standard voltage 1.1 like you have... I only tried the 1.2 Standard yesterday. Hope this helps my heat issues. I have my fail safe temp warning in set cpu set at 42c and I usually hit that at least 2 a day


    Thanks for the help!!
     
  7. mph122074
    Offline

    mph122074 Member

    Joined:
    Mar 13, 2010
    Messages:
    133
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Falls Church, VA
    Ratings:
    +0
    yeah I had a problem with the 1200 yesterday and thats when I switched to the 1100...

    hope it works...
     
  8. mrdroid
    Offline

    mrdroid Member

    Joined:
    Dec 16, 2009
    Messages:
    511
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Pittsburgh, PA
    Ratings:
    +0
    I downloaded from ROM manager so I'm not sure when they were posted. But at the time I wasn't able to flash one P3 kernal over another. It would say it was successful but wouldn't actualy change. I installed the Chevy SV 800mhz kernal and it's running a lot better but still about 5-10c hotter than the .62 with bekit's kernal.
     
  9. Tallica
    Offline

    Tallica Premium Member Rescue Squad Premium Member

    Joined:
    Mar 17, 2010
    Messages:
    3,259
    Likes Received:
    1
    Trophy Points:
    101
    Location:
    Middleboro, MA
    Ratings:
    +1
    Just wondering if I use a kernal other then P3droids if I will miss out on any features or functionality, If I can get Chevy's kernals to boot and run stable with this Rom is their anything I would be missing out on?

    Read the Wiki and was a little confused.
     
  10. Luxferro
    Offline

    Luxferro Member

    Joined:
    Nov 14, 2009
    Messages:
    103
    Likes Received:
    0
    Trophy Points:
    16
    Ratings:
    +0
    Not really, most of the features would pretty much go unused by most phone users anyway. Just find whatever kernel you like and runs good on your phone. Just make sure it uses the AnyKernel format.

    If your unsure what that is, google ;)
     
  11. Tallica
    Offline

    Tallica Premium Member Rescue Squad Premium Member

    Joined:
    Mar 17, 2010
    Messages:
    3,259
    Likes Received:
    1
    Trophy Points:
    101
    Location:
    Middleboro, MA
    Ratings:
    +1
    What features?
     
  12. mrdroid
    Offline

    mrdroid Member

    Joined:
    Dec 16, 2009
    Messages:
    511
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Pittsburgh, PA
    Ratings:
    +0
    Ok I'm running the LV 800mhz from p3designs.info/sapphire/
    Seems to be running a lot better now. I have to use TempMonitor for temp readings though... doesn't seem to be reporting CPU temp. TempMonitor is reporting 29c so CPU temp is probably close to 38-39c. Which is extremely high for idle.
     
  13. wingdo
    Offline

    wingdo Active Member

    Joined:
    Feb 17, 2010
    Messages:
    1,036
    Likes Received:
    1
    Trophy Points:
    38
    Location:
    Chicago
    Ratings:
    +1
    CPU temps are not working in the current kernels.
     
  14. justinthegeek
    Offline

    justinthegeek Member

    Joined:
    Jun 29, 2010
    Messages:
    98
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    127.0.0.1
    Ratings:
    +0
    Most other kernels do not have wifi working with Sapphire.
     
  15. dmacleo
    Offline

    dmacleo Premium Member Rescue Squad Premium Member

    Joined:
    Jan 12, 2010
    Messages:
    1,479
    Likes Received:
    0
    Trophy Points:
    36
    Location:
    Etna,ME
    Ratings:
    +0
    have not looked in day or so, have the sapphire ones had the extra setcpu profiles added?
    the page does not reflect it yet, I am using the stock one from sapphire right now.

    and thanks p3 for the kernels, your work is appreciated.