HELP! Stuck at Moto Logo w/SP Recovery

[MaxBobcat]

I am taking your advice and letting it charge right now, but FYI, earlier when I had my phone connected to the computer, I could open up My Computer and see my G drive (droid), but when I tried to open it up, it said Disk Not Found. That would make it really hard to do your last steps you posted.

 

[pc747]

you will have to mount your droid from sprecovery I laid out the steps above. We will have to wait for it to charge to try it. but wants you enable usb mass storage it should pop up

 

[MaxBobcat]

So Pilotcharles, I should follow post #24 first, and then do post #29 correct?

 

[pc747]

i deleted post 24. I was sleep pasting. You will only need 24 if it goes really south.

 

[MaxBobcat]

Ok, so I followed the steps outlined and got the correct ese81 update installed on my phone. It went through and said thanks for installing bugless beast and everything. After I installed it, I tried to reboot in sprecovery and the phone turned off.

I tried to turn it on and it was a no go. I plugged it back in and it went back to the moto logo and stayed there.

I've kept it charging on the moto logo for hours and can't get it to boot.

Help!

 

[wmnomore]

reboot into recovery by pulling battery. flash a nandroid backup and then try again.

 

[pc747]

after you flashed the pete 81 did you wipe data/factory reset and cache

 

[MaxBobcat]

after you flashed the pete 81 did you wipe data/factory reset and cache

Yes.

I have left my phone charging all night.

When I unplug the charging cord, it stays at moto logo for a while. Once I do a battery pull and press the power button, I still get nothing.

I am scared that i really bricked this phone.

I can't even do this method...

Now you can live without fear of bricking - Android Forums

Because when I try it, it says, Cannot Program Phone, Batt Low.

So, I know it is my battery that is screwing everything up.

When I plug it into the wall, the white light by the miniusb port on the droid flashes white for a second when I plug it in, then it turns off.

Is there anything I can do in SPRecovery to "turn on" my miniusb port to allow charging, because it seems like it's not getting any juice into it.

 

[pc747]

yeah you tried rsdlite. I want to try something. Take your battery out but do it with your phone in the charger. See if you are able to boot up or do you still bootloop

 

[MaxBobcat]

yeah you tried rsdlite. I want to try something. Take your battery out but do it with your phone in the charger. See if you are able to boot up or do you still bootloop

Ok, I took my battery out then plugged the droid into the wall.

Still at the white moto logo...

 

[pc747]

At this point you may want to flash rsdlite but your battery does not seem to be charging up.
Was you running a rom before you rooted or did you root straight from 2.1

 

[MaxBobcat]

At this point you may want to flash rsdlite but your battery does not seem to be charging up.
Was you running a rom before you rooted or did you root straight from 2.1

I came straight from 2.1

When I plug my droid into the computer using usb, about half of the time the white led by the miniusb will stay lit white. Should I try it to leave it in this position, as this means it is charging?

 

[pc747]

I have an idea but give me a moment to figue out how to upload the file

 

[pc747]

I am trying to find away to upload this folder

 

[pc747]

I am about to upload a file. still awaiting mega upload