Going from Rom to Rom

Discussion in 'Android Hacks and Help' started by budf0x, Feb 9, 2010.

  1. budf0x

    budf0x New Member

    Joined:
    Feb 6, 2010
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    I had sholes installed because i needed the files. then i just did a restore w/ boot and system checked w/ smoked glass v4. It is very choppy and buggy.

    Is there a method to go from ROM to ROM?

    Also, I was reading what came w/ the smoked glass v4. When i went from sholes to smoked glass, i dont think it got everything thatwas supposed to come w/ smoked glass(i.e. facebook widget, overclocking, etc).

    I ended up overclocking using setcpu to 900mhz.

    What am I doing wrong here guys?

    Thanks again, you all are a big help!
     
  2. KZIWarrior

    KZIWarrior Silver Member

    Joined:
    Dec 31, 2009
    Messages:
    2,609
    Likes Received:
    2
    Trophy Points:
    103
    Location:
    Nashville, TN
    Ratings:
    +2
    As long as you go from and to the same firmware version/ROM (i.e. 2.0.1 or 2.1) than you can just use the update method. If you go from one firmware version to the other than you'll need to use the nandroid method (i.e. completely wipe all data, clear cache ect.).
    Pete's BB ROM has good instructions:
    AllDroid - View topic - [ROM] Bugless Beast V0.7.5 (2/9/10)