Droid Bionic might be bricked

Discussion in 'Droid Bionic Tech Support' started by tim253, Jul 8, 2012.

  1. tim253

    tim253 New Member

    Joined:
    Feb 19, 2012
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    Screen reads

    Invalid Flash Mode (S) (Boot Failure)
    OA.61

    Battery OK
    OK to Program
    Transfer Mode:
    USB Connected

    Invalid CG OTV (CG: system): Invalid SP Data
    Invalid CG HAB (CG:system, status:0X0035)
    Invalid CG OTV (CG: system)

    When trying to install new program RSD hangs at Failed flashing process 15/20 flash boot "boot.img -> Phone returned FAIL
     
  2. jcwilliams

    jcwilliams Active Member

    Joined:
    Jul 21, 2010
    Messages:
    1,394
    Likes Received:
    3
    Trophy Points:
    38
    Location:
    OH
    Ratings:
    +3
    Sounds like a bad day. Hope you get it fixed. I know you can manually flash each image but i don't know how...
    Good luck
     
  3. Imprezive

    Imprezive Member

    Joined:
    Jun 10, 2010
    Messages:
    102
    Likes Received:
    1
    Trophy Points:
    18
    Location:
    Arizona
    Ratings:
    +1
    If you are using rsd lite then and want. 902 i would just pull the battery out then hold the volume up and down at the same time then hit the button. Select to ap fastboot, it shouldnt show a failure next to it. You are then ready to flash. If it fails try again in some cases ive had to use rsd 3 times for a success dont give up hope and good luck!
     
Search tags for this page

bionic 0x0035

,

droid bionic flashing screen battery

,

failed flashing process 11/16 system

,

flashing+process 15/20

,

motorola bionic boot failure oa61

,

motorola bionic bricked failed flashing process