Compcache Capable Kernels

Discussion in 'Bugless' started by EnJoY, Dec 23, 2010.

  1. EnJoY
    Offline

    EnJoY Member

    Joined:
    Jul 9, 2010
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Massachusetts, USA
    Ratings:
    +0
    The following are CompCache enabled kernels. Please feel free to post if you know of others that I've missed. I recommend using ClockWork Recovery to install this patch for best results.

    Edit (by Pete): Compcache is to be used on V0.6.2 or later. Reason being is that Compcache in Bugless Beast is more advanced than some other ROMs because you can choose the RAM usage by percentage rather than just turning it on or off. Be warned that flashing alternate kernels may overwrite my Compcache files, breaking the ability to change the RAM usage percentage (although it still may seem that it is working). To ensure that the percentage setting for Compcache is working, compare each setting by typing into a terminal "compcache stats" You should also note that if you install a kernel not compatible with Compcache, I designed the toolkit app to automatically remove the option to enable it.

    |Pete

    v0.3 - URL: Peter Alfonso

    |Slayher

    v1.6 - URL:
    Froyo Kernels by slayher - CyanogenMod Forum
    v1.7 - URL: Index of /DL/LFY/KERNELS

    |P3Droid

    v.32.7 - URL: P3Droid Kernels
    Sapphire Kernels - Works with BB (Scroll Down): http://wiki.ccroms.net/sapphire/releases/2.0.0

    |JDLFG

    v.32.25 - URL: jdlfg kernels v.32.2.5 NEW - CyanogenMod Forum

    |ChevyNo1

    Compcache/Gingerbread - URL:
    Index of /kernels-052011

    |RaidZero


    Low Voltage 2.6.32.9 - URL: http://www.droidforums.net/forum/raidzero/124467-kernels-low-voltage-2-6-32-9-a.html

    |prime

    Gingerbread URL:
    http://www.droidforums.net/forum/cyanogenmod/127262-kernel-deprimed_test-break-if-you-can.html

    |rMoD

    URL: http://www.droidforums.net/forum/droid-hacks/132295-rmod-series-kernels.html

    |CorCor67

    URL: http://rootzwiki.com/showthread.php?948-Elite-Series-Kernels-V3

    Enjoy... :greendroid:
    Last edited: Jul 10, 2011
  2. J*Bishop
    Offline

    J*Bishop Member

    Joined:
    Jan 23, 2010
    Messages:
    540
    Likes Received:
    0
    Trophy Points:
    16
    Ratings:
    +0
    awesome. this info should be posted in the sticky compcache thread. thx!
  3. EnJoY
    Offline

    EnJoY Member

    Joined:
    Jul 9, 2010
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Massachusetts, USA
    Ratings:
    +0
    bump :icon_ banana:
  4. EvilGST
    Offline

    EvilGST New Member

    Joined:
    Dec 26, 2010
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    Hi,

    I'm having a problem getting compcache to work with the P3 Kernels listed here. I've tried Slayher kernels and it seems to work with them but, the speed listed is not the speed I get :/ ex: if I get the 1.2ghz one im still running at stock 600mhz it does not matter which one i get they all seem to not like me and run on stock speeds. Can anyone help me please?
  5. EnJoY
    Offline

    EnJoY Member

    Joined:
    Jul 9, 2010
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Massachusetts, USA
    Ratings:
    +0

    What ROM?

    Are you using SetCPU to detect and set clockspeeds?
  6. JinjiM3Rx7
    Offline

    JinjiM3Rx7 New Member

    Joined:
    Dec 27, 2009
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    Well as for me the Slayher kernels have worked the best on the miui roms. I was actually gona ask bout the new 12/24 D1 Miui rom n so far I'm just running stock miui kernel n jusgt wit setcpu any suggestions??? Thanks

    Sent from my Droid using DroidForums App
  7. EnJoY
    Offline

    EnJoY Member

    Joined:
    Jul 9, 2010
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Massachusetts, USA
    Ratings:
    +0
    The Slayher kernels should still be fully compatible with MIUI as far as I know.
  8. JinjiM3Rx7
    Offline

    JinjiM3Rx7 New Member

    Joined:
    Dec 27, 2009
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    K thanks! I'm gona play with them a lil n I post up wat are the pros n cons....... thanks

    Sent from my Droid using DroidForums App
  9. EvilGST
    Offline

    EvilGST New Member

    Joined:
    Dec 26, 2010
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    I'm running BB 0.6.1. No, I'm not using setCPU. Do you think that is the problem?

    The P3 Kernels will run at advertised speeds but, there's no chance of getting compcache working with them.
  10. ZaChYmO
    Offline

    ZaChYmO Member

    Joined:
    Dec 20, 2010
    Messages:
    120
    Likes Received:
    0
    Trophy Points:
    16
    Ratings:
    +0
    Ive flashed p3droid kernels and ramswap.zip compcache, compcache will not run same thing for slayher couldnt get compcache to run ;(
    come to find out after all this mess my droid miui 12.24 runs best with slayher 1.2g vs p3droid...

    COmpcahe runs in both kernels by starting manually
    Last edited: Dec 30, 2010
  11. chewy74
    Offline

    chewy74 Active Member

    Joined:
    Apr 7, 2010
    Messages:
    1,352
    Likes Received:
    16
    Trophy Points:
    38
    Ratings:
    +16
    Dl and flash this with clockwork
    http://bit.ly/fyiWMg

    Then go in to Rom toolkit and enable compcache. Reboot and wait a few mins then check in terminal emulator to see if it started. If your home screen widgets hangs and gets stuck loading after reboot just leave it alone and wait and it will fix itself
  12. iamasongnow
    Offline

    iamasongnow Member

    Joined:
    Sep 13, 2010
    Messages:
    190
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Albany, NY
    Ratings:
    +0

    let me know if you get it working on miui 12.24, i flash the 1.7 slayher 1ghz and the slayher compcache.zip and it gives me "compcache: permission denied"
  13. EvilGST
    Offline

    EvilGST New Member

    Joined:
    Dec 26, 2010
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    1
    Ratings:
    +0
    This does not work with the P3 Kernels. I tried multiple times "Failed to open /dev/block/ramzswap0: No such file or directory"
  14. chewy74
    Offline

    chewy74 Active Member

    Joined:
    Apr 7, 2010
    Messages:
    1,352
    Likes Received:
    16
    Trophy Points:
    38
    Ratings:
    +16
    I have p3 1100 lv running with compcache.

    I first flashed the kernel, than the p3 ramswap zip at the bottom of the kernels index page. Then I flashed petes compcache zip and enabled compcache through the Rom toolkit, reboot and waited a few mins and it worked
  15. dfuser312553
    Offline

    dfuser312553 Silver Member

    Joined:
    Aug 27, 2010
    Messages:
    2,084
    Likes Received:
    0
    Trophy Points:
    101
    Ratings:
    +0
    @evilgst is your version of Busy Box 1.17? I may be wrong on this but I thought it was required.
Search tags for this page
droid charge compcache
,

facepalm x2

,
how to check kernel support comcache
,

super facepalm