Issue getting Link2sd script to mount ext4 partition on boot with SD10rc1
It seems that the link2sd script to auto mount the ext4 part is not taking for some reason.
thanks for the instructions over in the SD10 thread. I tried to PM you but it says your box if full. Did not want this to clutter up the sd10 thread as I may not be ROM related
Device: Droid 1
Kernel: Deprimed 184.108.40.206 (latest from link at top of "break if you can" thread)
SD Card: 32g Class 4
Partition ( all set as Primary): Data:28g Fat32, Apps:1g EXT4, Swap:128mb Linux Swap
Here is a summary of the issue for anyone that can offer help:
I did the "modprobe ext4" command as SU in terminal and it looks to have took
( no error). I then opened Link2sd and you get the pop up that asks for what format of partition you have. I choose EXT4 and it took this time, without the error that happened without the previous terminal command. It then instructed me to reboot with a notation if you got the message again that it meant that there was an issue with mounting the ext4 partition automatically at boot. So after reboot I opened link2sd and once again I get the initial pop up screen asking for what my app partition format is. I chose ext4 to see what would happen and it gave me the error like before I did the terminal command. So it looks like the script to automatically mount on boot is not taking for some reason.
What am I doing wrong or what do I need to do to get this to work?
Any help would be greatly appreciated.