Kernels Tested

[dmacleo]

curious as to what kernels work with this, thought maybe (if ok with you guys) I could sticky this and we could update as kernels tested.

[eagle1967]

sure not a problem. im pretty sure any droid 1 kernel should work depending on phone of course
but anyone do this if you can list compcache support or not also thanks

[dmacleo]

IIRC most do now right? will make sure to check that.

[666ogre666]

Been running chevys ulv 1.25ghz for a while and its been good. No compcache but I never use it anyways

Sent from my Sourcery using DroidForums App

[dmacleo]

ok with the included slahyer kernels I was seeing cpu temps running in high 130's F and this causes my phone issues. even limiting to 800 was high temps.

I swapped to chevy 1000 med volt and ran for 12 hours with zero issues. I am now testing chevy LV 1250 kernel.

I should add my phone is extremely sensitive to kernels and temps.

update: as expected LV kernel locks up, will test MV same speed then if issues will drop speeds.

ok the MV 1250 works but does run hot unless limited (as expected) so I am going back to the MV 1000 for now.

[TMYINC]

I have ran about every P3Droid kernel except for the underclock ones..i.e 600mhz and 700mhz. Both low and standard voltage and both lows i.e 125mhz & 250mhz. I have not had and issue with any one of them except that my phone gets a little finicky with the 1250mhz both LV and SV. I can try the underclocked ones if anybody is interested. I run P3Droid a lot and have all of the kernels on my SD card. I never clock below 800mhz but I still have the kernels for testing. My next run of kernels will be slayher's LFY kernels. I swap kernels like I swap underwear so if anybody wants one tested just let me know.

Edit: Im not a compcache user but I will try that out also just to see how it works.

[dmacleo]

please test and report, if possible see what one has best cpu temps too for each speed.
ul and lv kernels lock mine up easily even at 800m.

[TMYINC]

please test and report, if possible see what one has best cpu temps too for each speed.
ul and lv kernels lock mine up easily even at 800m.

lv usually works prett good for me. ulv give me some issues with higher frequencies and also get hotter easier. A question about compcache btw. I never use it so I was wondering if you needed a module with P3Droid kernels?

[dmacleo]

not sure as I seldom used it either, thats something the devs could answer better.

[TMYINC]

OK thanks. I noticed the ramzswap module before for P3Droid and slayher kernels. Just didn't know if it was needed or not. Thats what I was thinking the "enable compcache" option under sourcery settings was doing...downloading the module.

Edit: Downloaded the ramzswap module from P3Droids website and flashed it. Used the "start compcache" option under sourcery settings. Checked it in terminal su then compcache stats and all looks good. Will start testing compcache support on P3Droid kernels.