DroidForums.net is the original Verizon Android Forum! Registered Users do not see these ads. Please Register - It's Free!
Page 9 of 10 FirstFirst ... 7 8 9 10 LastLast
Results 81 to 90 of 99
Like Tree1Likes

Thread: [How TO] Restore VZW Galaxy Tab to stock DJ11

  1. Droid Newbie
    buddybird's Avatar
    Member #
    229172
    Join Date
    Oct 2011
    Posts
    2
    Phone
    Droid Bionic
    #81

    samsung tab VZW (sch-i800) OOOPS!

    OK, here is something to scratch your head about: I Did the Heimde (1.11) flashing with the stock VZW ROM (windows xp). Flash portion worked like a charm. The unit re-booted. The SAMSUNG screen appeared... and never went away. I waited a good 10 minutes. It never went any farther. per instructions, I tried the POWER+VOL to get into recovery to do the "wipe/factory reset" thing but I could not get in (I have a feeling I might not have done it correctly though). Then, per instructions, I unplugged device, waited a bit, plugged back in to attempt re-flashing and now I got this little image. I turn off the device but it comes back when I power it back on. If it is plugged in to the PC, this screen comes on by itself. Heimdel can see the device but FAILS when I try to flash. ideas?

    [How TO] Restore VZW Galaxy Tab to stock DJ11-2012-02-29-18.12.59-medium-.jpg
    Last edited by buddybird; 02-29-2012 at 07:23 PM.
  2. Droid Newbie
    JustinBuser's Avatar
    Member #
    264444
    Join Date
    May 2012
    Posts
    3
    Phone
    I727
    #82
    Quote Originally Posted by dafonse View Post
    I know its been a while on this but i tryed doing this today but when i run the zadig.exe and i click on the device theres nothing there.

    I downloaded the verizon boot strap from the market and the tablet stays on samsung so im trying to flash this to stock but am new, coming from motorola droid so trying to learn tablet stuff lol, any help would be very appreciated.
    I had to put the Tablet into download mode (hold vol down + power to boot) and plug it into my computer before zadig would detect it. After doing this the SCH-I800 shows up as Samsung Composite Device. You may also have to run zadig.exe as an Administrator depending on how your Windows is configured.
  3. Droid Newbie
    JustinBuser's Avatar
    Member #
    264444
    Join Date
    May 2012
    Posts
    3
    Phone
    I727
    #83
    [How TO] Restore VZW Galaxy Tab to stock DJ11-untitled-picture.png
    I got the PIT file by going to the utilities tab, clicking Detect under Detect Device and then waiting for the radio button next to device detected to be checked. Then you can click save as next to Download PIT and save the PIT file then go back to the Flash tab and load it in. After you do this you'll have the option to add Partition files, just add them as indicated from the original image with the "slots" that don't exist any more. An error popped up for me when loading the zImage file as the image for the Recovery partition but it still seemed to accept/flash it, which worked fine for me.
  4. Droid Newbie
    JustinBuser's Avatar
    Member #
    264444
    Join Date
    May 2012
    Posts
    3
    Phone
    I727
    #84
    I packaged all of this up into an actual Heimdall Firmware Package (not sure why this wasn't done from the beginning) that I can verify works with Version 1.3.2 of the Heimdall frontend. Firmware can be found here: https://docs.google.com/open?id=0By5...21mUTNwUDhiRUU .

    Plug device directly into an onboard (i.e. not through a hub) USB port on your computer after putting it into download mode (hold vol down + power to boot).
    Run zadig.exe from the Heimdall Drivers folder as Administrator.
    In the Zadig Options menu select List all devices.
    In the device drop down list select Samsung USB Composite Device.
    Zadig should look like this [How TO] Restore VZW Galaxy Tab to stock DJ11-untitled-picture.png
    Click Replace Driver (or Reinstall Driver if that's what the buttons says)
    Close Zadig and then run heimdall-frontend.exe as Administrator.
    On the Load Package tab under Heimdall Firmware Package click Browse and select the Firmware you downloaded from the link above.
    Click on the Load / Customize button in the bottom right.
    Navigate to the Flash Tab which should now have files listed under Partitions and look like this: Name:  50375d1337976006t-how-restore-vzw-galaxy-tab-stock-dj11-untitled-picture.png
Views: 2209
Size:  24.7 KB
    Click the Start button in the lower right corner.
    After Flashing you may have to boot into recovery mode and do a factory reset although I personally didn't have to do (hold vol up +power to boot into recovery and then select wipe device / factory reset)
    Boot normally, to bypass the Verizon Activation if you just want to use Wifi you can do the following, press VolUp, VolDown, VolDown, VolUp, VolUp, VolUp, VolDown, VolDown, VolDown, VolDown (seriously, this actually works)
  5. Droid Newbie
    joeldfair's Avatar
    Member #
    265025
    Join Date
    May 2012
    Posts
    1
    Phone
    Samsung Galaxy Tab 7
    #85

    Bricked Tab back to NORMAL!

    Everything, followed precisely, worked perfectly. Thank you sooo much. Awesome.


    Quote Originally Posted by JustinBuser View Post
    I packaged all of this up into an actual Heimdall Firmware Package (not sure why this wasn't done from the beginning) that I can verify works with Version 1.3.2 of the Heimdall frontend. Firmware can be found here: https://docs.google.com/open?id=0By5...21mUTNwUDhiRUU .

    Plug device directly into an onboard (i.e. not through a hub) USB port on your computer after putting it into download mode (hold vol down + power to boot).
    Run zadig.exe from the Heimdall Drivers folder as Administrator.
    In the Zadig Options menu select List all devices.
    In the device drop down list select Samsung USB Composite Device.
    Zadig should look like this Click image for larger version. 

Name:	Untitled picture.png 
Views:	643 
Size:	52.9 KB 
ID:	50377
    Click Replace Driver (or Reinstall Driver if that's what the buttons says)
    Close Zadig and then run heimdall-frontend.exe as Administrator.
    On the Load Package tab under Heimdall Firmware Package click Browse and select the Firmware you downloaded from the link above.
    Click on the Load / Customize button in the bottom right.
    Navigate to the Flash Tab which should now have files listed under Partitions and look like this: Name:  50375d1337976006t-how-restore-vzw-galaxy-tab-stock-dj11-untitled-picture.png
Views: 2209
Size:  24.7 KB
    Click the Start button in the lower right corner.
    After Flashing you may have to boot into recovery mode and do a factory reset although I personally didn't have to do (hold vol up +power to boot into recovery and then select wipe device / factory reset)
    Boot normally, to bypass the Verizon Activation if you just want to use Wifi you can do the following, press VolUp, VolDown, VolDown, VolUp, VolUp, VolUp, VolDown, VolDown, VolDown, VolDown (seriously, this actually works)
  6. Droid Newbie
    BGRed's Avatar
    Member #
    268175
    Join Date
    Jun 2012
    Posts
    2
    Phone
    Samung Galaxy Tab sch-i800
    #86
    I feel like I've followed these excellent instructions properly twice through and am still not successful in reviving my semi-brick. My tab was/is getting stuck on the Verizon Wireless logo.

    Heimdall showed successfull transfering of the firmware to the tab; but, still no successful reboot. When I try to wipe data / factory reset now, I am getting the following message:

    E:Can't mount /dev/block/mmcblk0p2
    (Invalid argument)
    E:install_application_for_customer:Can't mount DATA:

    We bought this refurbished from Amazon.Woot and the warranty is already expired. Samsung wants the minimum $70 to perform the diagnostics and I am not sure that we want to spend that money (maybe would just buy a new tab if I can't repair this myself). It is my daughters and I am not sure what events led up to the crash. One possibility is that she left an app open and the battery drained completely.

    Any thoughts from the experts here?
  7. Droid Newbie
    etschuetz's Avatar
    Member #
    129690
    Join Date
    Oct 2010
    Posts
    4
    Phone
    Motorola Droid
    #87

    Unhappy Sad day

    I followed the instructions to a "T", and yet, my Galaxy Tab is not getting passed the Samsung Logo. I can't even get into the recovery mode. I do not know what else there is I can do at this point. I just sent an email to Samsung seeing if there is anything they can tell me...I doubt it though. My poor Galaxy Tab
  8. Droid Newbie
    etschuetz's Avatar
    Member #
    129690
    Join Date
    Oct 2010
    Posts
    4
    Phone
    Motorola Droid
    #88

    Tried again

    Well, this time after waiting over a month, I made another attempt at this. Well, this time I get to the Verizon boot screen, but it does a couple quick vibrations and then loops. I did the Factory Reset on it, and still didn't succeed.
  9. Droid Newbie
    etschuetz's Avatar
    Member #
    129690
    Join Date
    Oct 2010
    Posts
    4
    Phone
    Motorola Droid
    #89
    It works!
  10. Droid Newbie
    BGRed's Avatar
    Member #
    268175
    Join Date
    Jun 2012
    Posts
    2
    Phone
    Samung Galaxy Tab sch-i800
    #90
    Quote Originally Posted by etschuetz View Post
    It works!

    Did you do something different this time?
Page 9 of 10 FirstFirst ... 7 8 9 10 LastLast

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Stock Restore Milestone A854
    By keets in forum Motorola Milestone
    Replies: 15
    Last Post: 04-18-2011, 02:15 PM
  2. Restore back to Stock Rom
    By blaconic in forum Droid 2 Roms
    Replies: 18
    Last Post: 01-31-2011, 10:20 PM
  3. Need the SBF to restore X to Stock.
    By xmguy in forum Droid X General Discussions
    Replies: 4
    Last Post: 12-09-2010, 08:30 PM
  4. How to Restore Stock Recovery?
    By wierdo124 in forum Android General Discussions
    Replies: 4
    Last Post: 12-07-2010, 07:49 AM
  5. Restore to Stock and Froyo Update
    By passtheboll in forum Motorola Droid
    Replies: 0
    Last Post: 10-04-2010, 07:26 PM

Search tags for this page

dj11 galaxy tab
,
galaxy tab boot loop
,

heimdall galaxy tab

,
how to use heimdall for galaxy tab
,

samsung galaxy tab stock rom

,
sch i800 stock rom
,

sch-i800 stock rom

,

sch-i800 vzw stock.zip

,

verizon galaxy tab odin

,
verizon galaxy tab pit file
Click on a term to search our site for related topics.
Find us on Google+