Stock FP5 Cannot ODIN?? Phone now bricked! Help?

[Sorn]

Hello!!!

I've gotten a warranty replacement for my samsung charge and went to ODIN flash it back to EP4D per tweaked's 2.2's recommendation. After attempting the following the phone does not boot. I can get the phone into download mode, but cannot access any recovery mode. When attempting to turn it on it gives a little phone, two ..'s with a yellow exclamation symbol with two more ..'s next to a computer symbol. It is stuck there. I used this guide : Flashing Roms or Return to Stock with Odin BY PICTURE to get the stock EP4/D image and the pits file to flash back to stock from FP5. Upon trying to flash I got this error log from ODIN:

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI510_VZW_EP4_ALL_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1)

I tried switching cables, unchecking and rechecking the time/reset options (the partitioning box was left checked), and many many attempts, all result in failed.

After that i decided to try to flash CWM to see if that would even work! It did not, same fail status. Here is the log:


<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> 0302_charge_recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1)


Any helpful advice would be appreciated. I will be sitting on this bricked phone for a few days waiting for my replacement and I would like to sort this all out before I attempt anything else on the new-new replacement :P