Thank you! Guess I can stop working on my guide to compile a complete ROM from source, because I know you're on it next!
First off, my thanks to adrynalyne also for putting this together. I have done this successfully from the guide written by matt graham and sniffle, but when I asked how to change the overclock settings, either they didn't know at the time or wanted to watch me squirm while they knew and I didn't. But, I still have a couple of questions (of course).
I am just curious if this code:
would still give me a checkout of a pre ESE53+ branch. I would like to create an OC WiFi AND wired tether LV kernel that I can try plugging into my old DroidMod 1.0 ROM. Plus, any hints on how to add a couple of OC slots the right way?Code:cd ~/android/kernel/omap git checkout -b stable 0dd7e0b cd ~/android/kernel/ti git checkout -b stable 846ab56 cd ~/android/kernel/prebuilt git checkout -b stable 06b921b
also you might want to add that for compiling for 2.0.1
the 2 occurances in pvrversion.h
should be 2152 like so
and compiling for 2.1 they should beCode:#define PVRVERSION_BUILD 2152 #define PVRVERSION_STRING "22.214.171.1242"
just in case you ran into the problem i hadCode:#define PVRVERSION_BUILD 2592 #define PVRVERSION_STRING "126.96.36.19992"
First of all, thank you so much for this guide, and I manage to successfully compile a kernel for my Motorola Droid. The overclock instruction was pretty straight forward, and I manager to overclock to 1 ghz, but I was wondering where or what line in clock34xx.c to edit that allow slot 5 working. Forgive me for asking, since I'm visually impair, it took me so long to find it. Anyway, once again, thank you so much for this guide, and keep up the good work out there.
I'm trying to build the ext2.ko and unionfs.ko for my Milestone to able to use APP2SD ..
I followed the instructions to get the omap source and patch the unionfs source into the kernel source then build. It can be built without problem, then I try to put the ext2.ko and unionfs.ko to the phone and try to load them using "insmod", it gives me an error of "Exec format error"
Do I have change anything in the "make menuconfig" in order to build binary compatible with my Milestone? I already checked that it's ARM system type has set to "TI OMAP" and "OMAP34xx Based System" is selected.
Is there anything else to pay attention?
(I'm using stock OTA Milestone 2.1update1 ROM with root access)
Thanks a lot!!!
Last edited by imwwwy; 05-20-2010 at 11:50 PM.