Thank you P3 and Team Black Hat....
So here is the link to where you can get the sbf.
Droid 2 Global SBF File (2.4.29) Full and RSDLite
Below is the procedure for the droid 2 global:
(the video below is just a basic idea of what your screen should look like. Follow the steps in the guide and use the video of the droid x as a visual reference)
The steps will be the same as the droid 2 except the sbf file will be different. Thanks to team black hat for the sbf file.
SBF file: Droid 2 Global SBF File (2.4.29) Full and RSDLite
Step 1: Boot into the bootloader, you do this by powering on and holding power on + volume up + volume down. You should see a black screen with text that says battery: OK
Step 2: Plug is your usb cord into the computer you loaded the rsdlite file on
Step 3: Click on your rsdlite program. You need to run as an administrator, to do that hold shift key and right click on the rsdlite program (do that as you are about to open the program). Thanks Firesong3k for reminding me about that.
Step 4: Next to the file name text box in the rsdlite program are three little dots. Click on those dots and find the file Click on that file and then click start. Make sure you have a strong battery before flashing this is the one time you need to ensure your battery is ok to get through the process, because the program erases everything and re-flashes your phone.
Step 5: Wait for it to get to 100% and reboot your phone to the motorola "M" symbol first then unplug your device. While at the M take off the battery cover out and remove your battery. Wait for about 3 seconds and then reinstall your battery. Power on and hold the physical X key until you get to the triangle and !.
Step 6: on your physical keyboard push the search button to get into the recovery mode. From there you are going to wipe data/factory reset. AFter that is complete click reboot.