Installing Kernels

[the_kwa]

I just rooted my droid, no problems, everything went smooth. Then I tried to install 3 different "Kernels".

1 from here
P3Droid Kernels

&

2 from here
[UPDATE] New Kernels - Low Voltage + Medium Voltage - 3/25/2010

All seemed to install fine, but when i go to reboot, my phone is stuck with the motorola "M" logo. It might reboot once or twice, but never passes the M.

[brochaos]

did you try low or medium voltage? maybe you need medium?

[the_kwa]

tried low, just assumed they were the safer bet...

[brochaos]

i would try medium just to see if it gets you booting.

[the_kwa]

Tried a medium, it worked at first. Then later when I rebooted, M logo freeze again.

[teddyearp]

What does your phone say under menu -> settings -> about phone -> from firmware version on down. That should have been the first thing asked.

[the_kwa]

Firmware Version
2.1-update1

Baseband Version
C_01.3E.03P

Kernel Version
2.6.29-omap1-g7fa8788
android-build@apa26#1

Build Number
ESE81

[teddyearp]

Good deal and thanks. I had a ton of troubles with p3droid's kernels (and not only that, but when I have posted about them, p3droid doesn't reply), try installing "Rom Manager-free" from the market, allow it to flash the CMRecovery image, then go to Download ROM -> CyanogenMod -> bekit kernels. They seem to be the best from what I experience and read.

good luck

[the_kwa]

just tried it, stuck on the "M" Screen again...

[the_kwa]

ok, so before when i have this problem i would hold the x and power on the phone. go to nandroid and bring my phone back to were it was.

now that i have clockworldmod, did i loose my old recovery's?