When u sbf and it finishes pull the battery and put it back in. While holding the power on, hold the x button. Then when u see the triangle and the question mark hit the search button. Then wipe data and cache then reboot. Should work. That's what I do when I sbf and never had a problem.
Sent from my Angelic Droid 2 Global
It never finished I always get a fail I have gotten it 3 times now. Battery already went low, switched back to my battery which was fully charged and gave my brother his back...
Originally Posted by clouse2013
I wanna try again before I go to bed but I don't think it will work and I need something new to try before I do.
Using the SBF from the link I posted earlier and RSD Lite 4.9.
Also when I wipe data or my cache I get an error saying E: Can't mount CACHE:recover/log
E: Can't finish MISC:
Yeah ive never had that happen. I would say if its fully charged try again but if not, its kind of over my head. Hopefully someone on here will know what to do. If your using 4.9 and either the .330 or the .229 SBF you shouldnt have a problem with either one. But good luck. Sorry i cant help out more
Originally Posted by moreyos
Try pulling your sdcard out and then wiping, sometimes it helps. Not sure why though......
Also, have you tried updating your moto drivers?
You could try using a diffrent sbf file. Their is a link to the newest one in the droid 2 global hacks section under stickies. Re-read the directions to make sure you have everything right. Don't know what else could help you.
Sent from my DROID2 GLOBAL using DroidForums
Full text for the failure...
"Failed flashing process. Failed flashing process. Interface AP-OS: Error erasing subscriber unit. Device API error: 0xE00300F Command: ERASE (0XE013203F);"
Thanks for trying at least, hopefully someone knows what the problem is now that I've posted the full failure status.
Edit: angel tried it with SD card removed, no luck. Same error...
bdsullivan, I used that file as well and it failed the same way.
You guys say its not bricked? I really feel like its done for.
Edit 2: Do you guys suggest using the up arrow or holding the volume up and down keys on the side. I have been using the volume keys and getting into bootloader every single time, but I've seen people say up arrow a bunch.
Also placing it in the C drive in a folder called moto? Sounds like it might actually work.
Does ur computer have usb 2.0? Or is it an oldschool usb port...I've had trouble sbf'ing because I was on an old laptop, and I know a couple other people w the same problem, but it threw a 're-enumeration' error
That's what happened with me remember? Moved to a 2.0 on a different pc, worked like a dream.
Originally Posted by chrisl20
From my Liberated DROID2 at 1.25ghz
No I have USB 2.0, I was 99% sure of it before I began to try this...but then again my laptop is going on 4 years old. I checked the stat sheet online, its 2.0 though.
Also nobody has asked yet but I'm doing this as admin. I even logged in to my admin account and shift+right clicked open as admin to ensure I did it right.
What computer software? Windows XP, 7?
Originally Posted by moreyos