Computer won't recognize Droid X while stuck in Bootloader.
I believe I am at a loss here, and I have looked all over these forums to try to find a suggestion, so I'm sorry if it sounds like I'm repeating information.
I have a Droid X running 4.5.621 (or was, at least) and it was rooted. I did not want the root anymore, so I pulled up RSD 5.8 and flashed with a .621 SBF that I found on the internet. I believe it was stable, but I could be wrong. After flashing with RSD, it gave me a big "PASS", ut the phone still said "SW Update in progress..." even after it was done.
I unplugged it from the cable about 30 seconds later because the message would not go away, and it rebooted to a "code error" in Bootloader. I then proceeded to do it again, and the same thing happened. Since the .621 would not work, I figured I'd try another ROM and went back to I believe .606. I decided to give it a couple of minutes after the "PASS" and the phone finally restarted. Instead of giving me a "code error" the phone simply says "Service Req'd".
tl;dr, My phone has the error
Battery is fully Charged
Computer will not recognize phone.
Am I at a loss?
[EDIT] I am using the Motorola cable and have also tried a Logitech as well as a 3rd party cable.