Originally Posted by
caesar1018
This is my first time posting on this site, so if this is the wrong area to post this issue please let me know.
I have a Droid X MB810 that is stuck in Bootloader mode as shown:
Booloader
30.04
Battery OK
OK to program
Connect USB
Data Cable
I do not know what version was on this phone prior to it becoming a brick
(I believe it was 4.5.621 OTA because the phone was recently activated 3 months ago)
I have loaded ALL sbf files in order from oldest to newest. Starting with 1KDS's files
2.3.340 full, 4.5.596, 4.5.602, 4.5.605 and finally the last one 4.5.621. I realize this last one is the point of no return
and I can no longer use the others (previous ones didn't work anyhow and gave error messages above "Battery OK" on the phones screen)
I am running Win 7 64-bit Ultimate w/ rdslite 4.8 and current drivers ( I assume the drivers are current as I have another fully functional Droid X that is being recognized fine by PC via the Motorola USB cable) Battery is a 100%.
Questions about the drivers????
Visually I see the following differences when hooking up both phones via USB:
The working phone when plugged in via USB shows the following info in the "driver software installation" window:
USB Mass Storage Device Ready to use
Motorola MB810 USB Device Ready to use
Motorola MB810 USB Device Ready to use
When I plug in the bricked Droid X it shows the following on the PHONES screen:
The last 2 lines of text change? Is this an issue?
Bootloader
30.04
Battery OK
OK to Program
Transfer mode:
USB
Also, when I connect it to the PC via the Motorola USB cable I get the "driver software installation" window but it says the following:
Motorola Flash Interface Ready to use
(I don't see any other info listed as with the fully functional phone)
I have even "wiped data/factory reset" and "system reboot" the phone each time after every sbf above with no luck either.
Any help here would be greatly appreciated.
Thanks
JT
