DroidForums.net is the original Verizon Android Forum! Registered Users do not see these ads. Please Register - It's Free!
Results 1 to 8 of 8

Thread: Help with potential brick.....

  1. Junior Droid
    Matte242's Avatar
    Member #
    189784
    Join Date
    Apr 2011
    Posts
    20
    Phone
    Droid X
    #1

    Unhappy Help with potential brick.....

    So, I bought a Droid X online that I knew couldn't load past the boot loader. I have another Droid X and have had this issue before, so I bought it thinking that it would be an easy fix. All I would have to do is SBF it back to stock and shazam! Not the case. I have tried everything that I can think of and need some help. I will start with what it currently does.

    When I boot it up, I get the red Motorola logo, then it goes straight into the boot loader and says:
    Bootloader
    30.04
    Battery OK
    OK to Program
    Connect USB
    Data Cable

    At first I decided to sbf. I tried using RSD Lite versions 4.7, 4.8, and 4.9 on my Vista PC, but also tried on Windows 7 and an XP virtual machine using 4.7. Always working on a fully charged battery. I have uninstalled all the drivers and reinstalled from USB and PC Charging Drivers - Motorola Mobility, Inc. USA
    All attempts gave the same results. The sbf I was using was VRZ_MB810_4.5.596_1FF_01.sbf from https://sites.google.com/site/1kdsdroidx/home
    I tried redownloading the file from this site (since I know that it works and have used on my othe Droid X) also downloaded the same sbf from another forum.

    It builds the image, then pushes it to the phone. It gets to 99% of flashing the sbf and then reboots the phone saying "SW Update Complete" and it boots back into tbe bootloader. Then I get an error in RSD saying:
    Failed flashing process. Failed flashing process. Phone[0000]: Error switching phone to BP Pass through mode (0x70BE); phone connected
    At this point I pulled the battery, went into recovery, wiped data/factory reset and cleared the cache. When I reboot, it boots into the bootloader with the error from above.

    I have tried other sbf files like the 2.3.340. All of them the full sbf and not just the system. I tried copying my update.zip folder from my working Droid X to this one and updating it that way. It goes through and gets almost to the end (at updating radio image) and gives this error:
    assert failed: motorola.update_cdma_bp("/tmp/rdl.bin", "/tmp/bp.img")
    E:Error in /sdcard.update.zip
    (Status 7)
    Installation aborted.

    I tried a couple update.zip files from other post, all with the same error. Any suggestions would be greatly appreciated!
  2.  
     
     
     
  3. Droid Sensei
    brad92's Avatar
    Member #
    122734
    Join Date
    Sep 2010
    Location
    TEXAS
    Posts
    4,506
    Liked
    61 times
    Twitter
    @listen2theman92
    Phone
    Rooted DROID RAZR
    #2
    You can try the Linux sbf method, using 1KDS' Linux CD. Its supposed to be pretty foolproof

    SSX v2.0
    -Brad
  4. Junior Droid
    Matte242's Avatar
    Member #
    189784
    Join Date
    Apr 2011
    Posts
    20
    Phone
    Droid X
    #3
    I forgot to mention that.....I used the bootable cd that runs the script as well as sbf in ubuntu. Both of them completed without error, but when the phone boots back up......back to the bootloader.



    Sent from my DROIDX using DroidForums
  5. Senior Droid
    vvildcard's Avatar
    Member #
    205041
    Join Date
    Jun 2011
    Location
    Oregon
    Posts
    201
    Liked
    2 times
    Twitter
    vvildcard
    Phone
    Droid X2 (Eclipse ROM)
    #4
    I bet you would have better luck with your question if you posted in the Droid X forum...

    Sent from my DROID X2 using DroidForums
  6. Junior Droid
    Matte242's Avatar
    Member #
    189784
    Join Date
    Apr 2011
    Posts
    20
    Phone
    Droid X
    #5
    Whoops...good call...

    Sent from my DROIDX using DroidForums
  7. Droid
    OnoSendi's Avatar
    Member #
    75805
    Join Date
    Jun 2010
    Posts
    35
    Phone
    Droid (Rooted)
    #6
    Is the SBF full, including bootloader, or system files only? Try finding another SBF. Can you boot into recovery? If so, clear cache/data then try reboot.
  8. Hawaiian Princess's Avatar
    Member #
    142190
    Join Date
    Nov 2010
    Location
    Hawaii
    Posts
    4,032
    Liked
    25 times
    Twitter
    Leanne_808
    Phone
    D2G DX D3 Xoom Razr Maxx SG3
    Premium Member
    #7
    Moving this to the DX tech support
  9. Master Droid
    Kasey Krehbiel's Avatar
    Member #
    179541
    Join Date
    Mar 2011
    Location
    Culpeper, VA
    Posts
    521
    Liked
    1 times
    Twitter
    kaseykrehbiel
    Phone
    Droid X
    #8
    <EDIT>
    Try this first: If your phone is still in the state mentioned in the thread above, pull the charge cord and reboot the phone and see if that solves the issue.
    </EDIT>

    Try following all instructions in this thread except as noted below:

    From Liberty 2.0.1, Stock, Apex, CM7, etc. (ANY ROM) to Liberty GB

    1. Re-download and re-install every program/file you need for the process.
    2. Don't use a virtual machine
    3. Plug your phone into a USB port on the back of the PC, preferably the one nearest the outside top. If it's plugged in there, try a different location.

    You can stop at the "do not activate your phone" step if you don't want to root it or put rooted GB on it. You can do everything except install LGB 0.x if you want rooted GB. Or you can go the whole way and install the latest Liberty ROM, which of course I recommend.

    I have a coworker whose phone also goes right back into the bootloader after he SBFs. He pulls the charging cord and the battery, puts the battery back in and boots into stock recovery. Wipe Data/Factory Reset, then reboot (all while the phone is unplugged) and it comes up just fine.
    Last edited by Kasey Krehbiel; 07-27-2011 at 05:16 AM.

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Two potential bugs?
    By rolandct in forum Liberty ROM DX
    Replies: 5
    Last Post: 01-15-2011, 01:30 PM
  2. Overclocking potential - D1 vs D2
    By Dknelson728 in forum Android General Discussions
    Replies: 0
    Last Post: 09-21-2010, 08:17 PM
  3. New potential owner here
    By fordmanforever in forum New Member Introductions & Site Assistance
    Replies: 6
    Last Post: 02-14-2010, 04:36 PM
  4. LED Flashlight potential
    By Royal2000H in forum Android Applications
    Replies: 11
    Last Post: 01-21-2010, 05:07 PM
  5. Potential Problem?
    By andymellon4 in forum Android General Discussions
    Replies: 17
    Last Post: 11-02-2009, 02:07 PM

Search tags for this page

0x70be bp passthrough

,

30.04 sbf

,
droid x bp pass through mode failure error
,
droid x flashing failed sb passing
,

droid x2 hard brick

,
droid x2. sbf, fail flashing process
,

error switching phone to bp pass through mode (0x70be)

,

failed flashing process error switching phone to bp pass

,
failed flashing process. error switching phone to bp pass th
,
radio brick android
Click on a term to search our site for related topics.

Tags for this Thread

Find us on Google+