Do you have ubs debugging turned on? And and usb set to MTP and not as mass storage? Also want to add that the proccess takes a lil bit of time. Do you get any error at all?
I will double check the usb and setting then get back to you. Didn't even think about any of that since I was using Fastboot Mode.
Last edited by wolfe69; 12-04-2012 at 09:41 AM.
USB Debugging is on, It was set to Mass Storage but I changed it and still nothing. Am I putting my phone into Fastboot Flash Mode (S) before trying to run option 1. Do I really need to do that or should I just hook the phone up normally and run the option?
Look for mats page in the forums. The instructions are there follow them to a tee. I would post the link but im short on time being at work atm. You can also search for matts 1.82 utility some have had probs with the previous one. Also make sure you are using the moto drivers in the zip file. Another thing to check is to make sure your using the oem usb cable not an aftermarket one.
Once you get there, recommend using Wifi to download the OTA push of ICS and install....and have it plugged into the wall charger.
I did it on 4G, not on charge, and it drained the crap out of the battery.
"Saving DROID Razr's, one battery at a time. :-)" - (credit SallyC)
Avatar is Maxwell Smart, AKA Agent 86, from "Get Smart" (with his signature "Shoe Phone"), a SitCom TV series by Mel Brooks & Buck Henry, based on the spy thriller series, "The Man From U.N.C.L.E.".
"Guidelines of Conduct" for DroidForums.net