Motorola RAZR display brightness problem

[alexmono]

Hello friends!

I'm new on this forum, I read it several times and I find it very interesting!
Hope you can help me with the problem that occurred on the phone a few days ...

Usually hold the screen in auto brightness mode. When I am near a source of light, brightness increases, but when I leave the area bright the screen should change his intensity, but he remains the same, at high brightness. Brightness decreases and becomes what it should be according to automatic mode only after lock-unlock screen.
Battery not lasting as it should because of problems with the screen.
It is a light sensor problem?
The phone has done the ICS update.

Thank you very much for your help!

[alexmono]

I tried to do a few slides on the screen with auto light shut but no result. Auto mode works only increasing their intensity to decrease should lock and unlock the keyboard ...

[alexmono]

What help? That's what I tried to do but did not work...
Please help me! What should I do? It's a problem of the Android?

[CJM]

What help?

That was spam replying, it's gone now

Tapped from a Galaxy Nexus using Xparent ICS

[alexmono]

Nobody knows a way to solve this problem?

[alexmono]

I did a phone reset but same result.
I also installed an application that checks the sensor phone, it shows me that the light sensor is working, the light beam is measured ... But the screen does not change intensity?

Help me please!

[Caesars]

Does the same thing for me, no biggie in my case, I've learned to "automatically" lock/unlock screen (still annoying lol).

Return of the Android

[alexmono]

I do not know, it's a hardware problem? In've tried to change settings but the problem persists ...Please, give me some advice!

[ddfuji]

ask your carrier for a new phone, faulty hardware

[TisMyDroid]

It's doubtful that it's hardware because it is capable of dimming and the sensor is working. It may be an ICS problem just not many people have noticed it. I am not aware of any solutions as I have not run across this yet. Not sure if this might serve as an alternative solution but I use a toggle widget with brightness set at 20% and can easily toggle it to 100% when I need it (which is very seldom).