Droid RAZR is stuck on "Droid" bootloop after using the different RazrUtility version

[NuelhWell03]

Hello friends, to all the good people in this wonderful place called the Droid Forums.
This will be my first post here and I am inquiring on my current issue with DroidsUtility.
It just occurred to me that I have bricked my phone after using the Utilities along with
RSD Lite 5.7 fastboot files without success. Now my phone is as the title states "stuck
on "Droid bootloop" if there are any person that is here that will lend a helping hand, I
sure would greatly appreciated.

Alright now allow me to add some useful information that some may be unaware off.
Did you guys know that the buttocks (gluteus maximus) is the biggest muscle within
the body? Yes and it is the least made aware off. The fact of the matter that it is
actually a bridge between the lower extremities (legs and parts) to the upper
extremities the trunk (mid-section) arms and head "seek here". So I make it a point to be
vigilante and alert as to its' placements in all activities especially when we are not moving.
Thank you, thank you.

[tygerchylde]

I need a little more information than just "stuck at droid." When you boot the phone up does it go into fastboot mode and give you a boot error, or are you stuck at the motorola logo?

[NuelhWell03]

When it boots up it passes the M logo splash then onto the Droid logo and there it's stuck in an eternal loop. Now I am able to access recovery and fastboot option, I can charge the battery just fine. I just cannot seem to pass that stage, please help.

[tygerchylde]

You've tried flashing the fastboot files and it still does the same thing? Have you gone into stock recovery and wiped the data and cache yet?

[NuelhWell03]

Yes I've wiped data along w/cache multiple Utilities times and is the same result. Now I understand, through chatting with a member that when I used the different DroidRazrUtilities between vers.1.6, 1.7, 1.8, that it will indefinitely brick it. Therefore my friend, please help me resolve this problem after the different Utilities reasons.

[TisMyDroid]

I had the same problem when I went to get rid of bootstrap so that I could install safestrap. All I did was use Mattlgroff's utility to go back to stock and proceeded from there... following these steps:

Going back to stock .211:
*On your pc, download and install Matt's Razr Utility 1.8 or 1.81 or 1.82. You can find 1.82 here:
Droid Razr Utility 1.82 [Windows] For Verizon Droid Razr And Droid Razr Maxx Only - DroidRzr.com
*Extract that utility to its own folder on your computer...you must extract the file on your pc. It will not work from your phone.
*After the utility is extracted, go to the Motorola drivers folder in the utility and make sure you have the latest Motorola drivers installed on your pc.
*make sure your phone is set to usb debugging mode (menu>system setting>developer options) if you are able.
*Power your phone off. Then power your phone on while holding down your power, the volume up and volume down buttons simultaneously.
*Connect your phone to your computer with the factory supplied usb cable.
*On your phone select AP Fastboot, then in the utility select option 1..."restore phone to stock .211. Do not unplug the usb cable until the utility finishes.
*When completed your phone should reboot to stock .211.
*After running option 1, restart phone to make sure all is fine.

Install the .215 leak:
*check to make sure usb debugging mode is checked (menu-> system setting-> developer options).
*Then in settings, go to “Security" and check “Unknown sources."
*install the .215 leak following instructions here:
http://www.droidforums.net/forum/dro...classroom.html

Root your og Razr or Razr Maxx:
*Simple step by step instructions for rooting using Mattlgroff's utility (use the same utility that you used to go back to stock) can be found on post #89 here:
Droid RAZR Utility 1.8
*If you plan on installing roms, install safestrap instead of bootstrap.

Safestrap:
*Once safestrap is installed, follow the steps in quidot's thread to prepare safestrap's safe and non-safe side so you are ready for those roms... Safestrap Guide for RAZR

[NuelhWell03]

Is just friends, I cannot access the the phones internal properties to turn on the usb debugging? I think the problem exists when I jumped Gingerbread 2.3.5 straigth to the ICS upgrade with RSD 5.7 fastboot, from there I have tried to restore to Gingerbread with RazrUtility 1.7 with no avail. and tried again numerous times to fastboot thru RSD Lite. Now I sometime receive a bootloop at the upgrading... process and goes no further until the phone is completely drained off battery. I get a boot failure at ap fastboot screen afterwards. Guys keep up the good work, thank you.

[NuelhWell03]

A wise man once said the the fountain of youth is in the pool where the water meets. Did you guys know that your bodies contains 70% water and the rest bones and organs, therefore. Firstly, I used the noodles around my waist to stay afloat so as to have total focus on the efficient mechanics to propel forward. With its respects, a peace of mind (ear plugs), and within time we will soon walk on the moon(seek here).

Hello guys, it's me again, whoa wait a minute... who is that crazy chinese guy leaving these confusing things, anyways to make thing interesting I would like to offer to the victor (the person with the working remedy to my case) the Droid Razr w/for now a working logic board and its shell with the broken lcd and screen. The reason I can afford to do this, because I now have 3 Droid Razr with the same bootloop, and one good lcd screen to swap back and forth.

I pray that the new incentive will motivate you guys more. I am in need to fix this phone to send money home for my humble family, thank you.

[TisMyDroid]

Try Sydman's suggestion in the last post of this thread.

Droid RAZR Utility 1.8