DroidForums.net is the original Verizon Android Forum! Registered Users do not see these ads. Please Register - It's Free!
Results 1 to 8 of 8
Like Tree3Likes
  • 1 Post By FoxKat
  • 1 Post By TisMyDroid
  • 1 Post By TisMyDroid

Thread: Droid RAZR: Please help!!

  1. Junior Droid
    delzell's Avatar
    Member #
    305003
    Join Date
    Oct 2012
    Location
    Under your house
    Posts
    16
    Twitter
    marcusdelzell
    Phone
    Droid RAZR XT912
    #1

    Droid RAZR: Please help!!

    i rooted my razr xt912 cdma verizon wireless phone on stock ics, and i loaded cm10 but for some reason i didnt have wifi and no matter what i did it wouldnt be enabled. i also lost CWM due to the wipe data/cache i had to do to get cm10. i hooked it up to my computer and did a wipe from there using RAZR Utility and used option 1. now my razr will not boot into anything and all i can get into is the razr recovery which wont let me download roms from. i can also go into AP fastboot and recovery i cant boot. i know im stupid lol. follow me on twitter: @marcusdelzell
    delzell (marcusdelzell) on Twitter
    please follow me on twitter: @marcusdelzell
  2.  
     
     
     
  3. Super Moderator
    FoxKat's Avatar
    Member #
    54290
    Join Date
    Apr 2010
    Location
    Pennsylvania
    Posts
    8,588
    Liked
    2291 times
    Phone
    DROID MAXX XT1080!
    Premium Member
    #2
    Quote Originally Posted by delzell View Post
    i rooted my razr xt912 cdma verizon wireless phone on stock ics, and i loaded cm10 but for some reason i didnt have wifi and no matter what i did it wouldnt be enabled. i also lost CWM due to the wipe data/cache i had to do to get cm10. i hooked it up to my computer and did a wipe from there using RAZR Utility and used option 1. now my razr will not boot into anything and all i can get into is the razr recovery which wont let me download roms from. i can also go into AP fastboot and recovery i cant boot. i know im stupid lol. follow me on twitter: @marcusdelzell
    delzell (marcusdelzell) on Twitter
    Dear Delzell, you will need a computer to download the most recent Fastboot file for your phone, either the OTA version .211 or the leaked version .215 and then install it either with the Droid RAZR Utility 1.8, or using RSD Lite. Fortunately you can still get into AP Fastboot, so this is recoverable.

    Good luck!
    delzell likes this.

    "Professor FoxKat"
    "Saving DROID Razr's, one battery at a time. :-)" - (credit SallyC)
    Avatar is Maxwell Smart, AKA Agent 86, from "Get Smart" (with his signature "Shoe Phone"), a SitCom TV series by Mel Brooks & Buck Henry, based on the spy thriller series, "The Man From U.N.C.L.E.".
    "Guidelines of Conduct" for DroidForums.net
  4. Rescue Squad
    TisMyDroid's Avatar
    Member #
    171269
    Join Date
    Feb 2011
    Location
    Central New York
    Posts
    4,462
    Liked
    950 times
    Phone
    Samsung Galaxy Note 2
    #3
    Hi FoxKat! Missed you, you busy dog! Welcome aboard Delzell. You're in good hands with FoxKat. He has done everything with his Razr including our guinea pig in making sure we could get back to stock after installing the leak .215.

    I just went through the same problem with my Razr...stuck in a bootloop after trying to get rid of bootstrap to install safestrap. I went back to stock using Mattlgroff's utility, then re-installed the .215 leak, re-root and then installed a rom (all in the past couple days).

    Other helpful instructions for doing the same can be found here:

    phone is looping animation after installing rom PLEASE IM REALLY SCARED I BROKE IT
    Last edited by TisMyDroid; 10-31-2012 at 05:02 AM.
    delzell likes this.
  5. Junior Droid
    delzell's Avatar
    Member #
    305003
    Join Date
    Oct 2012
    Location
    Under your house
    Posts
    16
    Twitter
    marcusdelzell
    Phone
    Droid RAZR XT912
    #4
    FoxKat, TisMyDroid, thanks you guys so much! It worked if there is anything else I can do to show support, just tell me. I want to install the Red Tide Revenge ROM on my razr. Big mistake trying out CM10.. But anyways, thanks so much!
    please follow me on twitter: @marcusdelzell
  6. Rescue Squad
    TisMyDroid's Avatar
    Member #
    171269
    Join Date
    Feb 2011
    Location
    Central New York
    Posts
    4,462
    Liked
    950 times
    Phone
    Samsung Galaxy Note 2
    #5
    Quote Originally Posted by delzell
    FoxKat, TisMyDroid, thanks you guys so much! It worked if there is anything else I can do to show support, just tell me. I want to install the Red Tide Revenge ROM on my razr. Big mistake trying out CM10.. But anyways, thanks so much!
    Saying thanks works nice to show support. Thank you! You can also “like" a post. It helps let others know that you agree with the post or that the post worked for you.

    Now to install them roms. Most roms can install with safestrap. I just installed the DroidHD rom. I just wrote these step by step instructions to get back to stock, install the 215 leak, root and install safestrap (I'm a step by step person). Go through them and pick up where you already left off:

    Going back to stock .211:
    *On your pc, download and install Matt's Razr Utility 1.8 or 1.81 or 1.82. You can find 1.82 here:
    Droid Razr Utility 1.82 [Windows] For Verizon Droid Razr And Droid Razr Maxx Only - DroidRzr.com
    *Extract that utility to its own folder on your computer...you must extract the file on your pc. It will not work from your phone.
    *After the utility is extracted, go to the Motorola drivers folder in the utility and make sure you have the latest Motorola drivers installed on your pc.
    *If you are able, make sure your phone is set to usb debugging mode (menu>system setting>developer options).
    *Power your phone off. Then power your phone on while holding down your power, the volume up and volume down buttons simultaneously.
    *Connect your phone to your computer with the factory supplied usb cable.
    *On your phone select AP Fastboot, then in the utility select option 1..."restore phone to stock .211. Do not unplug the usb cable until the utility finishes.
    *When competed your phone should reboot to stock .211.
    *After running option 1, restart phone to make sure all is fine.

    Install the .215 leak:
    *check to make sure usb debugging mode is checked (menu-> system setting-> developer options).
    *Then in settings, go to “Security" and check “Unknown sources."
    *install the .215 leak following instructions here:
    http://www.droidforums.net/forum/dro...classroom.html

    Root your of Razr or Razr Maxx:
    *Simple step by step instructions for rooting using Mattlgroff's utility (use the same utility that you used to go back to stock) can be found on post #89 here:
    Droid RAZR Utility 1.8
    *If you plan on installing roms, install safestrap instead of bootstrap.

    Safestrap:
    *Once safestrap is installed, follow the steps in quidot's thread to prepare safestrap's safe and non-safe side so you are ready for those roms... Safestrap Guide for RAZR
  7. Junior Droid
    delzell's Avatar
    Member #
    305003
    Join Date
    Oct 2012
    Location
    Under your house
    Posts
    16
    Twitter
    marcusdelzell
    Phone
    Droid RAZR XT912
    #6
    Quote Originally Posted by delzell View Post
    FoxKat, TisMyDroid, thanks you guys so much! It worked if there is anything else I can do to show support, just tell me. I want to install the Red Tide Revenge ROM on my razr. Big mistake trying out CM10.. But anyways, thanks so much!
    On the DroidHD rom, what do you do with the capasitive buttons on the Razr? I really like the on-screen buttons and i want to disable the ones built into the phone. how can i do that?
    please follow me on twitter: @marcusdelzell
  8. Rescue Squad
    TisMyDroid's Avatar
    Member #
    171269
    Join Date
    Feb 2011
    Location
    Central New York
    Posts
    4,462
    Liked
    950 times
    Phone
    Samsung Galaxy Note 2
    #7
    Quote Originally Posted by delzell
    On the DroidHD rom, what do you do with the capasitive buttons on the Razr? I really like the on-screen buttons and i want to disable the ones built into the phone. how can i do that?
    I like the soft buttons also. It is what I have on my tablet, that I have had for a year and preferred then on my tablet and now also on my Razr M. The on-screen soft buttons is exactly why I chose the DroidHD rom. It was driving me crazy everytime I picked up my Maxx and having to use the capacitive phone buttons. But not anymore because the DroidHD rom took care of that. I think they did an excellent job with that rom. The on-screen buttons are so much more convenient, imo. So far, the only thing I notice missing is Swype but that is easily resolved by getting one from play store.

    There are two versions of the DroidHD rom...one with the on-screen soft buttons and one that uses the phone buttons (non-soft version). The soft button version disables the 4 buttons that are native to the phone.

    http://www.droidrzr.com/index.php/to...rom11droid-hd/
    delzell likes this.
  9. Junior Droid
    delzell's Avatar
    Member #
    305003
    Join Date
    Oct 2012
    Location
    Under your house
    Posts
    16
    Twitter
    marcusdelzell
    Phone
    Droid RAZR XT912
    #8
    Quote Originally Posted by TisMyDroid View Post
    I like the soft buttons also. It is what I have on my tablet, that I have had for a year and preferred then on my tablet and now also on my Razr M. The on-screen soft buttons is exactly why I chose the DroidHD rom. It was driving me crazy everytime I picked up my Maxx and having to use the capacitive phone buttons. But not anymore because the DroidHD rom took care of that. I think they did an excellent job with that rom. The on-screen buttons are so much more convenient, imo. So far, the only thing I notice missing is Swype but that is easily resolved by getting one from play store.

    There are two versions of the DroidHD rom...one with the on-screen soft buttons and one that uses the phone buttons (non-soft version). The soft button version disables the 4 buttons that are native to the phone.

    [Rom][1.1]Droid Hd - DroidRzr.com
    thanks! i will use this as my permanent ROM and i will make a solid black/white (havent decided the color yet) skin to cover up the capasative buttons sense i wont be using the anymore. they are still accessible, but out of sight out of mind right?
    website for the skin making: iPhone 5 Cases, Custom Phone Covers & Skins For Electronics | Skinit
    please follow me on twitter: @marcusdelzell

Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Replies: 175
    Last Post: 09-13-2012, 05:44 AM
  2. Replies: 7
    Last Post: 09-09-2012, 10:13 PM
  3. Replies: 6
    Last Post: 09-05-2012, 11:57 AM
  4. Replies: 7
    Last Post: 05-22-2012, 09:34 PM
  5. Replies: 5
    Last Post: 11-11-2011, 06:24 PM

Search tags for this page

droid razr bootloop after fastboot file
,
droid razr hd reboot loop
,

droid razr help

,

droid razr m utility

,
droid razr red tide revenge boot loop
,

droid razr utility 1.82

,

matt's utility version 1.82 download

,
razr xt912 stuck in boot loop
,
red tide revenge wont boot
,
utility 1.82 help
Click on a term to search our site for related topics.
Find us on Google+