Kernel (deprimed_test) - Break It If You Can

[prime]

so i dl the kernel, boot it up, and then use terminal to type "overclock" to get the ulv and then "primed" to make it persistant after reboot? no other scripts?

Assuming deprimed MSOC is installed, yes.

[prime]

Kernel 9 causes a motorola boot loop (just reboots after M logo) on my CM 7 - test 12. I can reboot into recovery and install kernel test 6 and it works fine. Not sure what the difference is, but no kernel after 6 has been able to boot for me. They all give me the same boot loop.

Nandroid restore /boot and then flash kernel.

[prime]

Kernel 9 causes a motorola boot loop (just reboots after M logo) on my CM 7 - test 12. I can reboot into recovery and install kernel test 6 and it works fine. Not sure what the difference is, but no kernel after 6 has been able to boot for me. They all give me the same boot loop.

6 and 9 are the same voltage, your certain your flashing 9?

[jerroedr]

so i dl the kernel, boot it up, and then use terminal to type "overclock" to get the ulv and then "primed" to make it persistant after reboot? no other scripts?

Assuming deprimed MSOC is installed, yes.

oh... i never used that app to overclock. your slots have been right in tune with my droid... the ulv 200-900. Im currently using reprimed which was just boot and go.

[jerroedr]

so i installed the oc app, and am booting the kernel now. once thats done, just the scripts and im good to go? i dont need to play around with the actual app itself right?

[jhuntdog]

Kernel 9 causes a motorola boot loop (just reboots after M logo) on my CM 7 - test 12. I can reboot into recovery and install kernel test 6 and it works fine. Not sure what the difference is, but no kernel after 6 has been able to boot for me. They all give me the same boot loop.

6 and 9 are the same voltage, your certain your flashing 9?
...
Nandroid restore /boot and then flash kernel.

I had identical issue with Deprimed #8. After installing #8 from CWR, phone would go into a "M Logo" boot loop. After pulling battery, holding 'X' to restart into CWR, I could install #6 just fine but #8 kept looping. Finally, I re-installed CM_sholes_full-12 (no wipe), then rebooted into CWR, and installed #8 fine.

Anyway, Thanks Prime for the much quicker fix! #9 is awesome. Keep up the excellent work!

[jerroedr]

when i type in overclock in terminal it just gives a bunch of directories that are non existant?

edit
loaded a module in the msoc app and then typed in overclock, and it said file existed, so then i typed primed.
i dont know how this overclock app works though. do I need to autoload on boot? how do I know if im running the ulv?

[magiman7]

I had identical issue with Deprimed #8. After installing #8 from CWR, phone would go into a "M Logo" boot loop. After pulling battery, holding 'X' to restart into CWR, I could install #6 just fine but #8 kept looping. Finally, I re-installed CM_sholes_full-12 (no wipe), then rebooted into CWR, and installed #8 fine.

Anyway, Thanks Prime for the much quicker fix! #9 is awesome. Keep up the excellent work!

I was waiting (hoping) for 13 to drop before trying to reinstall the system, but I went ahead and did this. Reflashed 12 w/o wiping and installed kernel 9 right afterwards (no boot between) and it is working fine. I don't know what had gotten messed up, but it is all good now. Thanks Prime and jhuntdog. This kernel is very sweet Prime.

[prime]

when i type in overclock in terminal it just gives a bunch of directories that are non existant?

edit
loaded a module in the msoc app and then typed in overclock, and it said file existed, so then i typed primed.
i dont know how this overclock app works though. do I need to autoload on boot? how do I know if im running the ulv?

Your only supposed to load the module but a single time, then unload module (the module will only exist once doing so).

In a terminal. (If the 900000 line reads vsel=60 your good to go).

cat /proc/overclock/mpu_opps

[prime]

Glad you guys got it worked out, I'm still trying to figure out why this is happening...it's recovery related.