Where's The Speed, Baby

[hookbill]

OK, I rooted again SetCPU and have it set for 1.1 Max 250 min. How come the fastest I've seen this puppy run in 600Mhz

Here's my Set Up: CPU GOVERNER: USERNAME
Profiles charging 500 Max 250 Min, Sleep 250 max 250 min, Power<30% 500 Max 250 Min, Failsafe 500 max 250 min. Battery 40.5 C

Your response is appreciated.

Edit: Running Sholes 2.0.5

[nphil]

Well is your phone plugged in?

I have mine set to ondemand, 800-1100, means setCPU automatically adjusts clock speed depending on work load. Not sure what the other cpu governors mean, maybe someone could shed some light on this for me. Charging and <100% profiles are 800/1100 too. Screen off is at 250/250 and my CPU temp never goes above 40C

If you just want it to be 1.1 ghz all the time (not recommended), disable profiles and adjust the sliders from the main screen.

[knotbeerdan]

slide your slider down to 250 then back up. Then youll see the speed you want. If not then its prolly the kernel

[52brandon]

my personal suggestion is to set your charge profile and sleep profile and leave the others unchecked. So when it's on, it's REALLY on lol. My settings are 550/250 for them. You did select autodetect for device right? What specific kernel is it?

[SCDroid]

Set your gov. to Performance and your BogoMIPS will be near your high always unless your profile changes it. my bogo is 1198.72 which is right below 1.2ghz.

here is what i'm using:

1200 mhz max
250 mhz min

governor is performance

profiles are:

charging: 500 max, 250 min
Sleep/standby: 800 max, 250 min
Power < 20%: 500 max, 250 min
Failsafe Profile Battery > 40.7 C:500 max, 250 min

[fishepa]

Mine did the same thing. I moved the slider all the way to left, then back up and the processor speed increased accordingly.

[hydrogenman]

make sure you have the version of setcpu from the market (the most up to date) if you have an old version it won't autodetect the kernel

[Topsy]

OK, I rooted again SetCPU and have it set for 1.1 Max 250 min. How come the fastest I've seen this puppy run in 600Mhz

Here's my Set Up: CPU GOVERNER: USERNAME
Profiles charging 500 Max 250 Min, Sleep 250 max 250 min, Power<30% 500 Max 250 Min, Failsafe 500 max 250 min. Battery 40.5 C

Your response is appreciated.

Edit: Running Sholes 2.0.5

You need the market version hook, the free version stopped at 600 Mhz, to go higher u need to pay the .99 cents.

[Martin030908]

Hook,
the 'userspace' governor doesn't actually work yet (Correct me if I'm wrong). Try using 'ondemand' or 'performance'. (The dev's website explains what each governor does)

also... did you select "auto detect" when you opened SetCPU or did you select "Droid"? Make sure you selected "auto detect"

[hookbill]

slide your slider down to 250 then back up. Then youll see the speed you want. If not then its prolly the kernel

Mine did the same thing. I moved the slider all the way to left, then back up and the processor speed increased accordingly.

Thank you. This is what worked. But it didn't move until I moved it all the way up to 1.2 mhz.

Thanks for all the suggestions. It's appreciated.